← Back to Nippon Paint Marine brand page

China-based coatings exporter — industrial & marine protective coatings from China's production bases

ICEBAN 1600 epoxy ice-class coating

Quick Specs

Underwater areas of the hull of vessels navigating in ice zones. Ultra-high solids, low VOC, two-component pure epoxy, abrasion-resistant, low-friction-resistance anti-corrosive coating for underwater areas of the hull of vessels navigating in ice zones; ultra-thick film type, applicable in a single coat. Parameters on this page: volume solids 95 ± 2%, theoretical spreading rate 1.90 m²/ℓ (500µm), two-component.

Parameter source: NIPPON MARINE original technical data sheet (TDS) "ICEBAN 1600 Epoxy Ice Zone Coating"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.

This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.

Request a Quote

Volume Solids	95 ± 2%
Dry Film Thickness	500µm
Theoretical Spreading Rate	1.90 m²/ℓ (500µm)
VOC	—
Density / Specific Gravity	—
Number of Components	Two-component
Thinner	No thinning required; for cleaning use THINNER 600
Mixing Ratio	Base : curing agent = 18:9
Colour / Appearance	Iron red base — DED143, curing agent — DED231

Browse Similar Models by Category

Coating Position

Primer Intermediate Coat Topcoat Auxiliary

Functional Category

Zinc-rich Primer Glass Flake Antifouling Heat-resistant Fire Protection Potable Water Tank Cold galvanizing Thermal Insulation

Resin Type

Epoxy Water-borne Polyurethane, fluorocarbon Acrylic Silicone Alkyd Inorganic Zinc Silicate Fluorocarbon Chlorinated Rubber Phenolic Vinyl Ester

The manufacturer's datasheet for this model does not state the coating position or resin type, so it has not been assigned to the above categories. Browse similar products by category, orContact Usconfirm the coating system.

FAQ

How many components does ICEBAN 1600 have?: ICEBAN 1600 is a two-component product; mix in the ratio given in the "Application Data" table on this page before use.
What is the mixing ratio of ICEBAN 1600?: The mixing ratio of ICEBAN 1600 is base : curing agent = 18 : 9.
What DFT is normally applied for ICEBAN 1600?: The normal DFT of ICEBAN 1600 is 500µm, determined by the coating system and design requirements.
What is the theoretical spreading rate of ICEBAN 1600?: The theoretical spreading rate of ICEBAN 1600 is 1.90 m²/ℓ (500µm); actual consumption is adjusted for substrate roughness, application loss and colour hiding power.
What is the volume solids of ICEBAN 1600?: The volume solids of ICEBAN 1600 is 95 ± 2%.
What thinner is used for ICEBAN 1600?: Recommended thinner for ICEBAN 1600: no dilution required; use Thinner 600 for cleaning.
What is the flash point of ICEBAN 1600?: The flash point of ICEBAN 1600 is 24°C for the base and 38°C for the curing agent; storage, transport and application shall follow the product safety data sheet.
How long does ICEBAN 1600 take to dry?: Drying time of ICEBAN 1600 under standard conditions: touch dry; actual results are affected by temperature, film thickness and ventilation.
Which standards are involved for ICEBAN 1600?: The technical data on this page states: ISO3233:1998 (see application instructions on this page). Specific applicability is subject to the manufacturer's technical data sheet and the recommended coating system.
Where can ICEBAN 1600 be purchased?: RichTech Industrial Technology (Shanghai) Co., Ltd. distributes industrial and marine coatings, representing brands including JOTUN, HEMPEL, International, PPG and KANSAI, and provides product selection, coating systems and quantity calculations. Company address: Changhui Building, 799 Yinxiang Road, Jiading District, Shanghai.

For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.

Product overview

Ultra-high solids, low VOC, two-component pure epoxy, abrasion-resistant, low-friction-resistance anti-corrosive coating for underwater areas of the hull of vessels navigating in ice zones; ultra-thick film type, applicable in a single coat. Assists vessels navigating in ice zones, protects the hull against corrosion and reduces ice friction against the hull.

Recommended use

Underwater areas of the hull of vessels navigating in ice zones

Product Data

Gloss
Type	Pure epoxy (high solids/abrasion-resistant, low friction resistance/two-component)
Colour	Iron red base — DED143, curing agent — DED231
Solids content (by volume)	95 ± 2% (ISO3233:1998)
Mixing ratio (by volume)	Base : curing agent = 18:9
Recommended film thickness	DFT: 500µm
Wet film	526µm
Theoretical Spreading Rate	1.90 m²/ℓ (500µm)
Thinner	No thinning required; for cleaning use THINNER 600

		10°C	15°C	25°C
Drying Time	Surface Dry	24 h	16 h	5 h
Drying Time	Hard Dry	4 days	78 h	48 h
Recoat interval	Minimum	8 h	6 h	3 h
(self-recoat)	Maximum	16 h	12 h	6 h

Pot life	5 min at 45°C
Flash Point	Base 24°C, curing agent 38°C

Application Methods

Airless spray with dedicated spray equipment (hot twin feed lines); see "Spraying Procedure" for details.

Brush	For small-area repair only

Surface Preparation

Blast clean to Sa3.0. All surfaces to be coated shall be kept clean, dry and free from contaminants. High-pressure fresh water washing to remove all grease, soluble salts and foreign matter.

Packaging Specifications	27 L (base 18 L, curing agent 9 L)

Safety

Take the necessary protective measures to avoid skin and eye contact (e.g. gloves, safety glasses, face

Precautions

1) The content of this product data sheet may be revised at any time as our experience grows and the product is further developed.

2) No dilution for spraying; use Thinner 600 for cleaning. 3) Store in the paint warehouse.

Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.

Purchase & Documents

Enquire / Request Quote & Lead Time View all NIPPON MARINE models

Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.