EVER COOL PRIMER thermal insulating primer belongs to thermal insulation coatings. It can be applied directly over existing coatings. Parameters on this page: volume solids 61 ± 2%, dry film thickness 100-150 µm, theoretical spreading rate 6.10 m²/L.
Parameter source: nippon-marin original technical data sheet (TDS) "EVER COOL PRIMER Thermal Insulation Primer"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 61 ± 2% |
|---|---|
| Dry Film Thickness | 100-150 µm |
| Theoretical Spreading Rate | 6.10 m²/L (100 µm) |
| VOC | 357 g / L as supplied |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Thinner | NIPPON MARINE THINNER 600 / NIPPON … |
| Mixing Ratio | BASE 3.85 / HARDENER 1 |
| Colour / Appearance | Gray,White |
A surface tolerant, epoxy based primer designed for EVER COOL FINISH which owns excellent resistance to water and corrosion. It can be applied directly over existing coatings.
Primer for EVER COOL FINISH
| Type | Epoxy (High build / Two-pack) |
|---|---|
| Color | Gray,White |
| Gloss | Semi-gloss |
| Volume Solids | 61 ± 2% (ISO3233:1998) |
| Typical Dry Film Thickness | 100 ~ 150 µm |
| Approx. Wet Film Thickness | 164 ~ 246 µm |
| Theoretical Coverage | 6.10 m²/ L (100 µm) |
(by self)
| Drying Time | Surface Dry | 2 hours (5°C) | 1 hour (20°C) | 40 minutes (30°C) | |
| Dry Hard | 24 hours | (5°C) 12 hours (20°C) | 6 hours (30°C) | ||
| Full Cure | 14 days (5°C) | 7 days (20°C) | 5 days (30°C) | ||
| Interval before Overcoating | Min. | 24 hours | (5°C) 12 hours (20°C) | 6 hours (30°C) | |
| Max. | ― (5°C) | ― (20°C) | ― (30°C) |
| VOC Values | 357 g / L as supplied |
|---|---|
| Thinner | NIPPON MARINE THINNER 600 / NIPPON MARINE THINNER 615 (China Regions) |
Airless Spray
| Tip range | 0.48 ~ 0.59mm |
|---|---|
| Fan angle | 55 ~ 62° |
| ( For T/U ) | 30° |
| Output pressure | 100~150 kg / cm² |
| Brush / Roller | For touching up small areas only |
| Mixing Ratio by Volume | BASE 3.85 / HARDENER 1 |
| Pot Life after Mixing | 5 hours (5°C) 3 hours (20°C) |
2 hours (30°C)
| Packaging | Two Packs Package may vary from country to country. |
|---|---|
| Japan Local Brand | EVER COOL PRIMER |
| Flash Point | BASE 29 °C, HARDENER 28.5 °C |
Blast cleaned to ISO-Sa 21/2 or power tool cleaned to St 3 is recommended.
Take precautions to avoid skin and eye contact (i.e. gloves, goggles, face masks, barrier creams etc.) Proper ventilation and protective measures must be provided during applications and drying period to keep solvent vapor concentrations within safe limits.
Prior to use, obtain, consult and follow the SDS for this product concerning health and safety information.
1)The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development.
2) For two coat system at new building , gray color should be applied as primary coat.
For M&R, white color should be applied.
3) For availability of product consult Nippon Paint Marine representatives.
4) Unit size and filled volumes can vary due to local regulations.
5) Use products that comply with local regulations to clean the paint equipment.
6) Store the paints in paint store.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
