ECOLOFLEX SPC 100 FWR tin-free self-polishing antifouling coating is an antifouling coating. Parameters on this page: volume solids 50 ± 2%, dry film thickness 70-150 µm, theoretical spreading rate 5.00 m²/L.
Parameter source: Nippon Marine original technical data sheet (TDS) for ECOLOFLEX SPC 100 FWR Tin-Free Self-Polishing Antifouling; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 50 ± 2% |
|---|---|
| Dry Film Thickness | 70-150 µm |
| Theoretical Spreading Rate | 5.00 m²/L (100 µm) |
| VOC | 395 g / L as supplied |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | 25 °C |
| Thinner | NIPPON MARINE THINNER 300 |
| Colour / Appearance | Red Brown, Dark Brown |
A hydrolytic self-polishing tin-free antifouling which contains a special acrylate copolymer developed with our patented technology as the basic resin and cuprous oxide as the main biocide. It is designed for ocean-going ships, especially showing excellent physical property for river-going ships.
ECOLOFLEX SPC series ensure excellent and long term antifouling performance for fuel saving and regular operation.
For ocean-going vessels, River-going vessels
| Type | Cuprous oxide / Special acrylate copolymer (Tin-free / Self-polishing / Hydrolysis) |
|---|---|
| Color | Red Brown, Dark Brown |
| Gloss | Semi-gloss |
| Volume Solids | 50 ± 2% (ISO3233:1998) |
| Typical Dry Film Thickness | 70 ~ 150 µm |
| Approx. Wet Film Thickness | 140 ~ 300 µm |
| Theoretical Coverage | 5.00 m²/ L (100 µm) |
| Drying Time | Surface Dry | 4 hours (5°C) | 2 hours (20°C) | 1 hour (30°C) |
| Dry Hard | 6 hours (5°C) | 4 hours (20°C) | 3 hours (30°C) | |
| Interval before Overcoating | Min. | 12 hours (5°C) | 6 hours (20°C) | 4 hours (30°C) |
| ( by self ) | Max. | ― (5°C) | ― (20°C) | ― (30°C) |
| Interval before Immersion | Min. | 24 hours (5°C) | 12 hours (20°C) | 12 hours (30°C) |
| ( 100 µm ) | ※See Note (4). |
|---|---|
| VOC Values | 395 g / L as supplied |
| Thinner | NIPPON MARINE THINNER 300 |
Airless Spray
| Tip range | 0.69 ~ 0.84 mm |
|---|---|
| Fan angle | 62 ~ 75° |
| Output pressure | above 150 kg / cm² |
| Brush / Roller | For touching up small areas only |
| Typical Package | 20 L Package may vary from country to country. |
| Japan Local Brand | - |
| Flash Point | 25 °C |
All surfaces to be coated should be clean, dry and free from
Take precautions to avoid skin and eye contact (i.e. gloves, goggles, face masks, barrier creams etc.)
| Proper ventilation and protective measures must be provided | during applications and drying period to keep solvent vapor concentrations within safe limits. |
|---|
Prior to use, obtain, consult and follow the SDS for this product concerning health and safety information.
1)The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development.
2)Use NIPPON MARINE THINNER 300 to wash painting appliances, hoses and guns before and after use.
3)The declaration letter of Tin-free Antifouling Paint would not be issued if mixed with the other antifouling paints product or another chemical products.
4) Interval before immersion is related to ambient conditions, ventilation, film thickness, and number of coats and will be affected correspondingly. Contact us for actual application.
5) For availability of product consult Nippon Paint Marine representatives.
6) Unit size and filled volumes can vary due to local regulations.
7) Store the paints in paint store.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
