UNIVERSAL EP-60 Universal Epoxy Paint EP-60 is an epoxy coating. Used for ship ballast tanks or similar areas; can be used as a primer in underwater environments. A low-VOC, high-solids, two-component epoxy high-build coating for immersed areas. Parameters on this page: volume solids 80 ± 2%; dry film thickness 100–300 µm per coat; theoretical spreading rate 0.354 kg/m²/200 µm. Comparable products from the same brand: EPOFEND AR 80 Strong Abrasion-resistant Epoxy High-build Paint, EPOFEND AR Abrasion-resistant Epoxy Paint, EPOFEND MT-30 Special Epoxy Paint MT-30.
Source: KANSAI original technical data sheet (TDS) 'UNIVERSAL EP-60 Universal Epoxy Paint EP-60'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 80 ± 2% |
|---|---|
| Dry Film Thickness | 100–300 µm per coat |
| Theoretical Spreading Rate | 0.354 kg/m²/200 µm |
| VOC | 190 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 30 °C |
| Thinner | Epoxy Thinner #20 |
| Mixing Ratio | Base/Hardener=9.44/1(by weight) |
| UNIVERSAL EP-60 | Universal Epoxy Paint EP-60 |
|---|
A low VOC, high solids, two pack high build epoxy coating for immersed areas.
For ballast tank or similar location. As a primer for in-water service.
Low VOC, High volume solids
| Color | Grey and Oxide Red |
|---|---|
| Colour | Grey and iron red |
| Volume Solids | 80±2 % |
| VOC | 190g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 190 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 30°C |
| Flash Point | Above 30 °C |
| Film thickness | Dry : 100-300 microns/coat Wet : 125-375microns/coat |
| Applied film thickness | Dry film: 100–300 µm per coat; wet film: 125–375 µm per coat |
| Theoretical Coverage | 0.354Kg/m2/200 microns |
| Theoretical spreading rate | 0.354 kg/m²/200 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=9.44/1(by weight) |
| Mixing ratio | Base/curing agent = 9.44/1 (by weight) |
| Pot life | 5°C | 20°C | 30°C |
| Pot life | 8hrs | 6hrs | 3hrs |
| Application Methods | Airless spray, air spray brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush and roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥15Mpa |
| Thinning ratio | 0–5% by volume |
Brush/Roller; Thinning ratio 5–10% by volume
| Thinner | Epomarine Thinner #20 |
|---|---|
| Thinner | Epoxy Thinner #20 |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 5hrs | 4hrs | 3hrs | 2hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 48hrs | 24hrs | 16hrs | 12hrs |
| Min. interval | Minimum recoat interval | 48hrs | 36hrs | 24hrs | 16hrs | |
| Max. interval | Maximum recoat interval | 7days | ||||
| Typical undercoat | Bare steel, SD ZINC 500 etc. |
|---|---|
| Suitable for undercoating | Bare steel, epoxy zinc-rich coating 500, and similar |
| Typical topcoat | RETAN 6000, KANPE FLON HD or according to the coating system of Cosco Kansai. |
| Suitable for overcoating | Polyurethane Topcoat 6000, fluorocarbon topcoat, or refer to our coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.
Please check this date sheet is current prior to using the product.
| Issued Date | 2018/4 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
