THERMOTECT EP Epoxy Heat-resistant Coating EP is a heat-resistant coating of the epoxy coating family. Phenolic epoxy heat-resistant coating for CUI (corrosion under insulation) protection. Specifications on this page: volume solids 63 ± 2%, DFT 100-150 µm per coat, theoretical spreading rate 0.230 kg/m²/100 µm. Comparable products of the same brand and type: EPOFEND GLASS 30 Epoxy Glass Flake Coating 30, EPOFEND MIO 30 Epoxy MIO Coating MIO-30, EPOFEND ZP-30 Epoxy Zinc Phosphate Primer ZP-30.
Parameter source: KANSAI original technical data sheet (TDS) 'THERMOTECT EP Epoxy Heat-resistant Paint EP'; spreading rate and other values converted from TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 63 ± 2% |
|---|---|
| Dry Film Thickness | 100–150 µm per coat |
| Theoretical Spreading Rate | 0.230 kg/m² per 100 µm |
| VOC | 321 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Thinner | Epoxy Thinner Tect EP |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| Colour / Appearance | Grey |
| THERMOTECT EP | Epoxy Heat-resistant Paint EP |
|---|
Phenolic epoxy.
A heat resistance paint based on phenolic epoxy for CUI(Corrosive Under Insulation).
Suitable for high temperature(up to 200°C)
Suitable for insulated and non insulated surface
Highbuild coatings
Excellent resistance to water and seawater
Tough and high abrasion resistance
| Color | Grey |
|---|---|
| Colour | Grey |
| Volume Solids | 63±2 % |
| VOC | 321g/L, accord with EU Dircrtive2004/42/EC, subcategory j |
| Volatile organic compound content | 321 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Base: 22°C, Hardener:9°C |
| Flash Point | Base: 22°C; Hardener: 9°C |
| Film thickness | Dry :100-150 microns/coat Wet : 159-238microns/coat |
| Applied film thickness | DFT: 100–150 µm/coat WFT: 159–238 µm/coat |
| Theoretical Coverage | 0.230kg/m²/100 microns |
| Theoretical Spreading Rate | 0.230 kg/m² per 100 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| Mixing ratio | Base : curing agent = 9:1 (by weight) |
| Pot Life | 10°C | 20°C | 30°C |
| Pot life | 8hrs | 5hrs | 2.5hrs |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | No. 163-619~623 |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–10% by weight |
Brush and roller
| Thinner | Tect EP Thinner |
|---|---|
| Thinner | Epoxy Thinner Tect EP |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 4hrs | 3hrs | 2hrs | 1hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 20hrs | 16hrs | 12hrs | 8hrs |
| Min. interval | Minimum recoat interval | 30hrs | 24hrs | 16hrs | ||
| Max. interval | Maximum recoat interval | 7days | ||||
| Applied Substrate | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Preceding coat | THERMOTECT EP, or according to the coating systems of Kansai. |
| Suitable for undercoating | THERMOTECT EP, or refer to the company's recommended coating system. |
| Typical topcoat | THERMOTECT EP, or according to the coating system of Cosco Kansai. |
| Suitable for overcoating | THERMOTECT EP or refer to the company's coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed. Store condition shall be in accordance with national regulations
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at
the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2020/06 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
