THERMO 600 PRIMER Silicone Heat-resistant Primer 600 is a heat-resistant coating of the silicone coating family. and other hot surfaces at temperatures up to 600°Cand 650°Cat a short time. As a primer it gives long-term protection to hot pipes, exhaust pipes, chimneys and other hot surfaces at temperatures up to 600°C (short-term peaks 650°C). A heat-resistant coating composed of modified silicone resin and inert pigments. Specifications on this page: volume solids 45 ± 2%, DFT 20-30 µm per coat, theoretical spreading rate 0.058 kg/m²/20 µm.
Parameter source: KANSAI manufacturer's Technical Data Sheet (TDS) "THERMO 600 PRIMER Silicone Heat-resistant Primer 600"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 45 ± 2% |
|---|---|
| Dry Film Thickness | 20–30 µm per coat |
| Theoretical Spreading Rate | 0.058 kg/m²/20 µm |
| VOC | 550g/L |
| Density / Specific Gravity | — |
| Number of Components | One-component |
| Flash Point | Above 27 °C |
| Thinner | Thinner X |
| Mixing Ratio | Single-component coating |
| THERMO 600 PRIMER | Silicone Heat-Resistant Primer 600 |
|---|
A heat resisting paint based on modified silicone resin and inert pigments.
As a primer for long-term protection of hot pipelines, exhaust pipes, smoke stacks
Excellent heat resistance (Up to 600°C)
| Color | Black |
|---|---|
| Colour | Black |
| Volume Solids | 45±2% |
| Flash Point | Greater than 27°C |
| Flash Point | Above 27 °C |
| VOC | 550g/L |
| Volatile organic compound content | 550g/L |
| Film thickness | Dry : 20-30 microns/coat Wet :44-67microns/coat |
| Applied film thickness | Dry film: 20–30 µm/coat; wet film: 44–67 µm/coat |
| Theoretical Coverage | 0.058kg/m²/20microns |
| Theoretical Spreading Rate | 0.058 kg/m²/20 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | -5°C-40°C |
|---|---|
| Mixing | Mix thoroughly with power agitator |
| Mixing | Stir thoroughly with a power tool |
| Mixing Ratio | One component coating |
| Mixing ratio | Single-component coating |
| Application Methods | Airless spray, air spray, brush and roller |
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.33mm-0.43mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–5% by weight |
Brush/Roller; Thinning ratio 0–5% by weight
| Thinner | Paint Thinner X |
|---|---|
| Thinner | Thinner X |
| Drying time & | Temperature | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 3hrs | 1hr | |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 5hrs | 3hrs | |
| Min. interval | Minimum recoat interval | 16hrs | 12hrs | 8hrs | |
| Max. interval | Maximum recoat interval | ||||
Full cure: must bake in 200°C-250°Cfor 1hr
| Typical topcoat | THERMO 600 FINISH LF |
|---|---|
| Suitable for overcoating | Lead-free Silicone Heat-resistant Topcoat 600 |
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
| Shelf life | 12months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at
the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2024/10 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
