TANKCARE PC-30 Phenolic Epoxy Paint PC-30 is an epoxy coating. A combined primer and topcoat coating for use on tank internal walls. A two-component, high-solids, high-build epoxy phenolic coating. Good heat resistance, with heat resistance up to 180°C (359°F). Excellent high-build applicability. Excellent anti-abrasion and impact resistance. Remarkable resistance to crude oil and seawater. Parameters on this page: DFT 100–300 µm/coat, theoretical spreading rate 0.271 kg/m²/150 µm, number of components: two-component.
Data source: KANSAI manufacturer technical data sheet (TDS) for TANKCARE PC-30 Phenolic Epoxy Paint PC-30; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | 100–300 µm per coat |
| Theoretical Spreading Rate | 0.271 kg/m²/150 µm |
| VOC | 359 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 30 °C |
| Thinner | Epoxy Thinner #20 |
| Mixing Ratio | Base/Hardener=4.4/1(by volume) |
| TANKCARE PC-30 | Phenolic Epoxy PC-30 |
|---|
A two pack hi solids hi-build epoxy novolac coating.
As a protective primer-finish coat can be used for internal surface of tanks.
Remarkable heat resistance at temperatures up to 180°C(359℉)
| Colour; Volume Solids | Oxide red, |
|---|---|
| VOC | 359g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 359 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than30°C |
| Flash Point | Above 30 °C |
| Film thickness | Dry 100-300 microns/coat Wet : 125-375microns/coat |
| Applied film thickness | DFT: 100–300 µm per coat; WFT: 125–375 µm per coat |
| Theoretical Coverage | 0.271Kg/m2/150 microns |
| Theoretical spreading rate | 0.271 kg/m²/150 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=4.4/1(by volume) |
| Mixing ratio | Base/Hardener = 4.4/1 (by volume) |
| Pot life | 5°C | 20°C | 30°C |
| Pot life | 4hrs | 2hrs | 1hr |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–5% by volume |
Brush/Roller; Thinning ratio 5–10% by volume
| Thinner | Epomarine Thinner #20 |
|---|---|
| Thinner | Epoxy Thinner #20 |
| Drying time & Overcoating interval | Drying time & Surface dry | Drying time & touch dry | 5°C 24hrs | 20°C 4hrs | 30°C 4hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 36hrs | 16hrs | 12hrs |
| Min. interval | Minimum recoat interval | 36hrs | 16hrs | ||
| Max. interval | Maximum recoat interval | 14days | 7days | ||
| Applied Substrate | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | TANKCARE PC-30 |
| Suitable for overcoating | Phenolic Epoxy PC-30 |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
