TANKCARE FW-NS Solvent-Free Epoxy FW-NS is an epoxy coating. As a protective primer-finish coat it can be used in freshwater tanks, potable water tanks and. A two-component, solvent-free epoxy paint. Parameters on this page: volume solids 100 ± 2%, dry film thickness 200-400 µm/coat, theoretical spreading rate 3.3 m²/L. Comparable models from the same brand: EPOFEND AR 80 ultra-high-abrasion epoxy high-build, EPOFEND AR abrasion-resistant epoxy, EPOFEND MT-30 special epoxy MT-30.
Parameter source: KANSAI original technical data sheet (TDS) for TANKCARE FW-NS Solvent-Free Epoxy FW-NS; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 100 ± 2% |
|---|---|
| Dry Film Thickness | 200–400 µm per coat |
| Theoretical Spreading Rate | 3.3 m²/L /300 µm |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 100 °C |
| Thinner | Epoxy Thinner #20 (for equipment cleaning only) |
| Mixing Ratio | Base/Hardener=6.3/1(by weight) |
| TANKCARE FW-NS | Solvent-Free Epoxy FW-NS |
|---|
A two component, solvent free epoxy paint
As a protective primer-finish coat can be used in freshwater tanks, potable water tanks and
Certificated by U.S. F.D.A. Test for compliance with U.S. F.D.A. C.F.R. 21 Part 175.300
Highly suitable recommended for drinking water tanks
| Color | Milk-white |
|---|---|
| Colour | Milky white |
| Volume Solids | 100±2 % |
| Flash Point | Greater than 100°C |
| Flash Point | Above 100 °C |
| Film thickness | Dry 200 -400microns/coat Wet : 200-400microns/coat |
| Applied film thickness | DFT: 200–400 µm per coat; WFT: 200–400 µm per coat |
| Theoretical Coverage | 3.3m2/l/300 microns |
| Theoretical spreading rate | 3.3 m²/L/300 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=6.3/1(by weight) |
| Mixing ratio | Base/Curing agent = 6.3/1 (by weight) |
| Pot life | 10°C | 20°C | 30°C |
| Pot life | 4hrs | 3hrs | 2.5hrs |
| Application Methods | Airless spray, Roller |
|---|---|
| Application Methods | Airless spray, roller |
Airless spray
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥15Mpa |
| Thinning ratio | 0–5% by volume |
Roller
Thinning ratio 5–10% by volume
| Thinner | Epomarine Thinner #20(Only for Washing) |
|---|---|
| Thinner | Epoxy Thinner #20 (for equipment cleaning only) |
| Drying time & | Temperature | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 48hrs | 28hrs | 16hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 96hrs | 56hrs | 36hrs |
| Before flooding | Dry to immersion | 20days | 14days | 10days | |
| Min. interval | Minimum recoat interval | 96hrs | 56hrs | 36hrs | |
| Max. interval | Maximum recoat interval | 10 days | 8days | 7days |
| Applied Substrate | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
