TANKCARE AE-60 High-solids Oil-resistant Static-conductive Paint AE-60 is an epoxy coating. Crude oil and product oil. The surface resistivity is 10⁷–10⁹ ohms. As a long-term static-conductive anticorrosive coating, used on the interior of steel storage tanks for crude oil and product oil. A two-component amine-adduct-cured epoxy coating with static-conductive material added. Lead< 100ppm hexavalent chromium, cobalt and cadmium below 10ppm.Parameters on this page: Volume Solids 80 ± 2%, Dry Film Thickness 100-200 µm/coat, Theoretical Spreading Rate 0.186 kg/m²/100 µm.
Source: KANSAI original technical data sheet (TDS) 'TANKCARE AE-60 High-solids Oil-resistant Static-conductive Paint AE-60'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 80 ± 2% |
|---|---|
| Dry Film Thickness | 100–200 µm per coat |
| Theoretical Spreading Rate | 0.186 kg/m²/100 µm |
| VOC | 217 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 29 °C |
| Thinner | Epoxy thinner |
| Mixing Ratio | Base/Hardener=8/1(by weight) |
TANKCARE AE-60
| TANKCARE AE-60 | High-solids Oil-resistant Static-conductive Paint AE-60 |
|---|
A two pack amine adduct cured epoxy paint with conducting electrostatic materials.
As long-term conducting electrostatic anti-corrosive coating on steel tank of interior surface for
Complies with GB 50393-2008
Excellent corrosive resistance
| Color | Grey |
|---|---|
| Colour | Grey |
| Volume Solids | 80±2% |
| VOC | 217g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 217 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 29°C |
| Flash Point | Above 29 °C |
| Film thickness | Dry : 100-200 | µm/coat | Wet : | 125-250 µm/coat |
| Applied film thickness | Dry film: 100–200 µm per coat | Wet film: | 125–250 µm per coat |
| Theoretical Coverage | 0.186Kg/m2/100 microns |
|---|---|
| Theoretical spreading rate | 0.186 kg/m²/100 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=8/1(by weight) |
| Mixing ratio | Base : curing agent = 8:1 (by mass) |
| Pot life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 4 hrs | 3hrs | 2hrs | 1hrs |
| Application Methods | Airless spray, air spray and roller |
|---|---|
| Application Methods | Airless spray, air spray, roller |
| Nozzle tip | Nozzle size | 0.33mm-0.43mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinner | Epomarine Thinner |
|---|---|
| Thinner | Epoxy thinner |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 24hrs | 16hrs | 10hrs | |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 48hrs | 24hrs | 16hrs | |
| Min. interval | Minimum recoat interval | 48hrs | 24hrs | |||
| Max. interval | Maximum recoat interval | |||||
| Applied substrate | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | Tankcare AE-60 paint or according to the coating system of Cosco Kansai. |
| Suitable for overcoating | Oil-resistant static-conductive coating, or refer to the company's coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2025/08 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
