TANKCARE AE-50 Phenolic Epoxy Antistatic Coating AE-50 is an epoxy coating. Surface resistivity is 10⁸-10¹¹ ohm. A phenolic epoxy coating with antistatic material added. Excellent anticorrosive performance; long-term stable electrostatic-conductive properties; excellent osmosis resistance; non-polluting to oil; light colours. Parameters on this page: volume solids 65 ± 2%, dry film thickness 100-300 µm/coat, theoretical spreading rate 0.240 kg/m²/100 µm.
Parameter source: KANSAI original technical data sheet (TDS) for TANKCARE AE-50 Phenolic Epoxy Antistatic Coating AE-50; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 65 ± 2% |
|---|---|
| Dry Film Thickness | 100–300 µm per coat |
| Theoretical Spreading Rate | 0.240 kg/m²/100 µm |
| VOC | 360 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 25 °C |
| Thinner | Epoxy Thinner #20 |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| TANKCARE AE-50 | Phenolic Epoxy Antistatic Coating AE-50 |
|---|
A two packs epoxy novolac paint with conducting electrostatic materials.
As long-term conducting electrostatic anti-corrosive coating on steel tank of interior surface for
Complies with GB 50393-2008
Excellent corrosive resistance
| Color | Grey |
|---|---|
| Colour | Grey |
| Volume Solids | 65±2 % |
| VOC | 360g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 360 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 25°C |
| Flash Point | Above 25 °C |
| Film thickness | Dry : 100-300 µm/coat Wet : 165-460µm/coat |
| Applied film thickness | Dry film: 100-300 µm/coat; wet film: 165-460 µm/coat |
| Theoretical Coverage | 0.240Kg/m2/100 microns |
| Theoretical spreading rate | 0.240 kg/m²/100 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 10°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| Mixing ratio | Base : curing agent = 9:1 (by mass) |
| Pot life | 10°C | 20°C | 30°C |
| Pot life | 5hrs | 4hrs | 2hrs |
| Application Methods | Airless spray, air spray and roller |
|---|---|
| Application Methods | Airless spray, air spray, roller |
| Nozzle tip | Nozzle size | 0.33mm-0.43mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinner | Epomarine Thinner #20 |
|---|---|
| Thinner | Epoxy Thinner #20 |
| Drying time & Overcoating interval | Temperature | 10°C | 20°C | 30°C | |
| Drying time & recoat interval | Surface dry | Touch dry | 6hrs | 4hrs | 2hrs |
| Touch dry | Semi-hard dry | 48hrs | 24hrs | 16hrs | |
| Min. interval | Minimum recoat interval | 48hrs | 24hrs | 16hrs | |
| Max. interval | Maximum recoat interval | 14days | 10days | 7days |
| Applied substrate | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | Epomarine AE -50 |
| Suitable for overcoating | Oil-Resistant Static-Dissipative Coating |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.
Please check this date sheet is current prior to using the product.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
