SILISAFE ZINC 80 Water-borne Inorganic Zinc-rich Primer 80 belongs to zinc-rich primers, water-borne system. Suitable for pretreated steel and inorganic zinc silicate shop-primed surfaces. Self-curing water-borne inorganic zinc-rich coating based on water-borne silicate. Remarkable heat resistance and less scorch by heat treatment. Parameters on this page: volume solids 54 ± 2%, dry film thickness 60–80 µm/coat, theoretical spreading rate 0.189 kg/m²/50 µm.
Parameter source: KANSAI original technical data sheet (TDS) “SILISAFE ZINC 80 Water-borne Inorganic Zinc-rich Primer 80”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 54 ± 2% |
|---|---|
| Dry Film Thickness | 60–80 µm/coat |
| Theoretical Spreading Rate | 0.189 kg/m²/50 µm |
| VOC | 0 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | — |
| Thinner | Water |
| Mixing Ratio | Liquid : powder = 1/2.5 (by volume) |
| Colour / Appearance | Grey |
| SILISAFE ZINC 80 | Water-borne Inorganic Zinc-rich Primer 80 |
|---|
A self-curing water-bone inorganic zinc coating based on water-bone silicate.
Compatible with blasted steel surfaces and inorganic zinc shop-primed surfaces
Complies with HG/T 3668-2020
Remarkable corrosion resistance
| Color | Grey |
|---|---|
| Colour | Grey |
| Volume Solids | 54±2% |
| VOC | 0 g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 0 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | N.V |
| Flash Point | N/A |
| Film thickness | Dry : 60-80 microns/coat Wet : 110-150microns/coat |
| Applied film thickness | DFT: 60–80 µm/coat WFT: 110–150 µm/coat |
| Theoretical Coverage | 0.189kg/m²/50microns |
| Theoretical Spreading Rate | 0.189 kg/m²/50 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Shelf Life | 6 months |
|---|---|
| Shelf Temperature | 10°C-35°C |
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Add powder to liquid first, then mix thoroughly with power agitator |
| Mixing | Add the powder to the liquid and stir thoroughly with a power tool |
| Mixing Ratio | Liquid/Powder=1/2.5(by V) |
| Mixing ratio | Liquid : powder = 1/2.5 (by volume) |
| Pot Life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 10hrs | 8hrs | 5hrs | 4hrs |
| Application Methods | Airless spray, air spray |
|---|---|
| Application Methods | Airless spray, air spray |
Airless spray
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–3% by weight |
| Thinner | Water |
|---|---|
| Thinner | Water |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 1hrs | 45mins | 30mins | 20mins |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 1.5hrs | 1hrs | 50mins | 30mins |
| Min. interval | Minimum recoat interval | 4hrs | ||||
| Max. interval | Maximum recoat interval | -- | ||||
| Applied Substrates | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | Epomarine Sealer Primer or according to the coating system of Cosco Kansai. |
| Suitable for overcoating | Epoxy tie-coat, or refer to the company's coating system |
The information given on this sheet is to the best of our knowledge and accurate at
the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2025/06 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
