SILANE AC Silane Impregnating Agent is an auxiliary material. Seals clean concrete or cement surfaces before primer application. High purity Isobutyl triethoxy silane. Excellent penetration. Excellent adherence with concrete Excellent adherence. Excellent effect of dryness Good drying. Excellent durability against chlorine ion, ultraviolet rays Excellent resistance to chloride ions and ultraviolet rays. Excellent ability of reducing water absorption Excellent ability to reduce water absorption. Parameters on this page: theoretical spreading rate 0.25–0.3 L/m², number of components one.
Source: KANSAI original technical data sheet (TDS) "SILANE AC Silane Impregnating Agent"; spreading rate and other values are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | — |
| Theoretical Spreading Rate | 0.25–0.3 L/m² |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | One-component |
| Flash Point | Above 62 °C |
| Thinner | Special Thinner (for cleaning) |
| Colour / Appearance | Clear |
| SILANE AC | Silane impregnating agent |
|---|
High purity Isobutyl triethoxy silane.
For saturation of well cleaned concrete or cement surfaces before application of primer.
Complies with JTJ275-2000
Excellent penetration properties
| Color | Clear |
|---|---|
| Colour | Clear |
| Purity | ≥98% |
| Purity | ≥98% |
| Flash Point | Greater than 62°C |
| Flash Point | Above 62 °C |
| Theoretical Coverage | 0.25–0.3 L/m² |
| Theoretical spreading rate | 0.25–0.3 L/m² |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing Ratio | One component |
| Mixing ratio | One-component |
| Application Methods | Airless spray, air spray brush and roller |
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.21mm-0.23mm |
| Nozzle pressure | Output pressure | ≥3Mpa |
| Thinning ratio | 0% by volume |
Brush/Roller brush, roller. Thinning ratio thinning ratio 0% by volume(by volume)
| Thinner | Special Thinner (for cleaning) |
|---|
| Drying time & | Temperature | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 3hrs | 1hrs | 1hr |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 4hrs | 2hrs | |
| Min. interval (for self) | Minimum recoat interval (self-overcoating) | 6hrs | 4hrs | ||
| Min. interval (for topcaot) | Minimum recoat interval (with topcoat) | 72hrs | 36hrs | 24hrs | |
| Max. interval | Maximum recoat interval | ||||
| Applied substrate | Concrete, cement |
|---|---|
| Suitable substrates | Concrete, cement |
| Typical topcoat | Epomarine concrete primer and moisture-curing coat |
| Suitable for overcoating | Epoxy cement primer, moisture-curing coating |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of issuing.
Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development. Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2025/04 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
