SD ZINC PRIMER 1500N Inorganic Zinc-Rich Primer 1500N is a zinc-rich primer. Suitable for pretreated steel and inorganic zinc-rich shop primer surfaces, for the non-immersed part of a ship. A self-drying inorganic zinc-rich coating based on alkyl silicate. Parameters on this page: volume solids 60 ± 2%, dry film thickness 60-75 µm/coat, theoretical spreading rate 0.324 kg/m²/75 µm. Comparable models from the same brand: AMEINCOAT ZINC PRIMER, SC ZINC PRIMER, SD NON ZINC PRIMER epoxy zinc-free shop primer.
Parameter source: KANSAI original technical data sheet (TDS) for SD ZINC PRIMER 1500N Inorganic Zinc-Rich Primer 1500N; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 60 ± 2% |
|---|---|
| Dry Film Thickness | 60–75 µm per coat |
| Theoretical Spreading Rate | 0.324 kg/m²/75 µm |
| VOC | 340 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | Above 19 °C |
| Thinner | Dedicated thinner |
| Mixing Ratio | Liquid : powder = 23/77 (by weight) |
| SD ZINC PRIMER 1500N | Inorganic Zinc-Rich Primer 1500N |
|---|
A self-curing inorganic zinc coating based on alkyl silicate binder
Compatible with blasted steel surfaces and inorganic zinc shop-primed surfaces For
Complies with SSPC PAINT 20, HG/T 3668-2009
Remarkable corrosion resistance
| Color | Grey |
|---|---|
| Colour | Grey |
| Volume Solids | 60±2% |
| VOC | 340g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 340 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 19°C |
| Flash Point | Above 19 °C |
| Film thickness | Dry : 60-75 microns/coat Wet : 100-125microns/coat |
| Applied film thickness | DFT: 60–75 µm per coat; WFT: 100–125 µm per coat |
| Theoretical Coverage | 0.324kg/m²/75microns |
| Theoretical Spreading Rate | 0.324 kg/m²/75 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Add powder to liquid first, then mix thoroughly with power agitator |
| Mixing | Add the powder to the liquid and stir thoroughly with a power tool |
| Mixing Ratio | Liquid/Powder=23/77(by weight) |
| Mixing ratio | Liquid : powder = 23/77 (by weight) |
| Pot Life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 8hrs | 7hrs | 6hrs | 5hrs |
| Application Methods | Airless spray, air spray |
|---|---|
| Application Methods | Airless spray, air spray |
Airless spray
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–10% by weight |
| Thinner | SD Zinc 1500N Thinner |
|---|---|
| Thinner | Dedicated thinner |
| Drying time & | Temperature | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 60mins | 30mins | |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 6hrs | 3hrs | 1hr |
| Min. interval | Minimum recoat interval | 48hrs | |||
| Max. interval | Maximum recoat interval | ||||
| Applied Substrates | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | Epomarine Sealer Primer or according to the coating system of Cosco Kansai. |
| Suitable for overcoating | Epoxy tie-coat, or refer to the company's coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | Liquid :6 months Powder:12 months( from date of production (25°C)) |
|---|---|
| Shelf life | Liquid: 6 months; powder: 12 months (from date of manufacture (25 °C)) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2025/6 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
