SD ZINC PRIMER 1000HA Inorganic Zinc Silicate Shop Primer 1000HA is a zinc-rich primer of the inorganic zinc silicate coating family. Recommended for automatic shop primer spray systems. A shop primer based on modified ethyl silicate and zinc powder. Specifications on this page: volume solids 28 ± 2%, DFT 15-25 µm per coat, theoretical spreading rate 0.070 kg/m²/15 µm. Comparable products of the same brand and type: SD ZINC 1000HA Inorganic Zinc Silicate Shop Primer 1000HA, SD ZINC 2000 Inorganic Zinc-rich Primer 2000, SILIFEND ZINC AS-50 Air-drying Inorganic Zinc-rich Coating.
Source: KANSAI original technical data sheet (TDS) "SD ZINC PRIMER 1000HA (S) Inorganic Zinc Silicate Shop Primer 1000HA (S)"; spreading rate and other values are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 28 ± 2% |
|---|---|
| Dry Film Thickness | 15–25 µm per coat |
| Theoretical Spreading Rate | 0.070 kg/m²/15 µm |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 14 °C |
| Thinner | Dedicated thinner |
| Mixing Ratio | Base/Hardener=55/45(by weight) |
| SD ZINC PRIMER 1000HA(S) | Inorganic Zinc Silicate Shop Primer 1000HA(S) |
|---|
A shop primer based on modified ethyl silicate and zinc powder
Recommended for use with automatic shop priming systems
Excellent high speed welding performance
| Color | Grey, Green and Oxide Red |
|---|---|
| Colour | Grey, green and iron red |
| Volume Solids | 28±2 % |
| Flash Point | Greater than 14°C |
| Flash Point | Above 14 °C |
| Film thickness | Dry : 15-25 microns/coat Wet : 54-89microns/coat |
| Applied film thickness | DFT: 15–25 µm per coat; WFT: 54–89 µm per coat |
| Theoretical Coverage | 0.070kg/m²/15 microns |
| Theoretical Spreading Rate | 0.070 kg/m²/15 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Add and mix thinner to base first, then add liquid to mix |
| Mixing | First mix the base with the thinner, then add the liquid |
| Mixing Ratio | Base/Hardener=55/45(by weight) |
| Mixing ratio | Base/curing agent = 55/45 (by weight) |
| Pot Life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 24hrs | |||
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–10% by weight |
Brush/Roller; Thinning ratio 0–10% by weight
| Thinner | SD Zinc 1000HA(S) Thinner |
|---|---|
| Thinner | Dedicated thinner |
| Drying time & | Temperature | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 3mins | 1.5mins | 1min |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 5mins | 3mins | 2mins |
| Min. interval | Minimum recoat interval | 24hrs | |||
| Max. interval | Maximum recoat interval | ||||
| Applied Substrate | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | Various of primers |
| Suitable for overcoating | Various primers |
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
| Shelf life | 6 months from date of production (25°C) |
|---|---|
| Shelf life | 6 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at
the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
