SD ZINC 100QD PRIMER Epoxy Zinc-rich Primer 100QD is a zinc-rich primer of the epoxy coating family. Protects blast-cleaned substrates before the application of subsequent coatings. A rapid-dry epoxy zinc-rich anti-corrosive coating composed of epoxy resin, polyamide and zinc powder. Excellent anti-corrosive performance; Short overcoating interval; Excellent adhesion to blasted steel. Specifications on this page: DFT 10-30 µm per coat, theoretical spreading rate 0.154 kg/m²/30 µm, number of components: two-component.
Parameter source: KANSAI manufacturer's Technical Data Sheet (TDS) "SD ZINC 100QD PRIMER Epoxy Zinc-rich Primer 100QD"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 43% |
|---|---|
| Dry Film Thickness | 10–30 µm/coat |
| Theoretical Spreading Rate | 0.154 kg/m²/30 µm |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 18 °C |
| Thinner | Epoxy thinner |
| Mixing Ratio | Base/Hardener=7/1(by weight) |
| SD ZINC 100QD | Epoxy Zinc-rich Primer 100QD |
|---|
A quick drying zinc rich anti-corrosive coating based on epoxy resin, polyamide hardener and zinc
Protect blasted steel surfaces before the application of various coating systems
Complies with SSPC PAINT 20, HG/T 3668-2009
Excellent corrosion resistance
| Color | Grey |
|---|---|
| Colour | Grey |
| Volume Solids | 43% |
| Flash Point | Greater than 18°C |
| Flash Point | Above 18 °C |
| Film thickness | Dry : 10-30microns/coat Wet : 23-70microns/coat |
| Applied film thickness | Dry film: 10–30 µm/coat; wet film: 23–70 µm/coat |
| Theoretical Coverage | 0.154kg/m²/30 microns |
| Theoretical Spreading Rate | 0.154 kg/m²/30 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=7/1(by weight) |
| Mixing ratio | Base/curing agent = 7/1 (by weight) |
| Pot Life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 16hrs | 12hrs | 8hrs | 6hrs |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–10% by weight |
Brush/Roller; Thinning ratio 0–10% by weight
| Thinner | Epomarine Thinner |
|---|---|
| Thinner | Epoxy thinner |
| Drying time & | Temperature | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 3mins | 2mins | 1min |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 4mins | 3mins | 2mins |
| Min. interval | Minimum recoat interval | 5hrs | 2hrs | ||
| Max. interval | Maximum recoat interval | ||||
| Applied Substrates | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | Universal EP-60, Epomarine EX-500 or according to the coating system of Cosco Kansai.. |
| Suitable for overcoating | General-purpose Epoxy Paint EP-60, Epoxy Paint EX-500, or refer to the company's coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 2 months from date of production (Temperature: 5~35°C; Humidity:≤85%) |
|---|---|
| Shelf life | 12 months from date of manufacture (temperature: 5–35°C; humidity: ≤85%) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2022/1 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
