SD ZINC 1000HA Inorganic Zinc Silicate Shop Primer 1000HA belongs to zinc-rich primers and the inorganic zinc silicate paint system. Recommended for automatic spray systems for shop primers. A shop primer based on modified ethyl silicate and zinc dust. Parameters on this page: volume solids 28 ± 2%, dry film thickness 15–25 µm/coat, theoretical spreading rate 18.7 m²/L. Comparable models from the same brand: SILISAFE ZINC SW-30 Water-borne Inorganic Zinc Silicate Shop Primer SW-30, SILISAFE ZINC 80 Water-borne Inorganic Zinc-rich Primer 80, AMEINCOAT ZINC PRIMER.
Parameter source: KANSAI original Technical Data Sheet (TDS) \"SD ZINC 1000HA(S) Inorganic Zinc Silicate Shop Primer 1000HA(S)\"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 28 ± 2% |
|---|---|
| Dry Film Thickness | 15–25 µm per coat |
| Theoretical Spreading Rate | 18.7 m²/L / 15 µm |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 14 °C |
| Thinner | Dedicated thinner |
| Mixing Ratio | Base/Hardener=55/45(by weight) |
| SD ZINC PRIMER 1000HA(S) | Inorganic Zinc Silicate Shop Primer 1000HA(S) |
|---|
A shop primer based on modified ethyl silicate and zinc powder
Recommended for use with automatic shop priming systems
Excellent high speed welding performance
| Color | Grey, and Oxide Red |
|---|---|
| Colour | Grey and iron red |
| Volume Solids | 28±2% |
| Flash Point | Greater than 14°C |
| Flash Point | Above 14 °C |
| Film thickness | Dry : 15-25 microns/coat Wet : 54-89microns/coat |
| Applied film thickness | DFT: 15–25 µm per coat; WFT: 54–89 µm per coat |
| Theoretical Coverage | 18.7 m2/L/15microns |
| Theoretical Spreading Rate | 18.7 m²/L/15 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Add and mix thinner to base first, then add liquid to mix |
| Mixing | First mix the base with the thinner, then add the liquid |
| Mixing Ratio | Base/Hardener=55/45(by weight) |
| Mixing ratio | Base/curing agent = 55/45 (by weight) |
| Pot Life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 24hrs | |||
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–10% by weight |
Brush/Roller; Thinning ratio 0–10% by weight
| Thinner | SD Zinc 1000HA(S) Thinner |
|---|---|
| Thinner | Dedicated thinner |
| Drying time & | Temperature | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 3mins | 1.5mins | 1min |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 5mins | 3mins | 2mins |
| Min. interval | Minimum recoat interval | 24hrs | |||
| Max. interval | Maximum recoat interval | ||||
| Applied Substrate | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | Various of primers |
| Suitable for overcoating | Various primers |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 6 months from date of production (25°C) |
|---|---|
| Shelf life | 6 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2024/05 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
