SD NON ZINC PRIMER Epoxy Zinc-free Shop Primer is a zinc-rich primer of the epoxy coating family. Used as a shop primer and primer for steel structures and containers. An epoxy-resin-based zinc-free shop primer. Fast drying; Excellent compatibility with most kinds of subsequent coats; Less effect for gas cutting and welding properties; Strong adhesion to steel. Specifications on this page: DFT 30-50 µm per coat, theoretical spreading rate 0.029 kg/m²/10 µm, number of components: two-component.
Parameter source: KANSAI original technical data sheet (TDS) “SD NON ZINC PRIMER Epoxy Zinc-free Shop Primer”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | 30–50 µm per coat |
| Theoretical Spreading Rate | 0.029 kg/m² per 10 µm |
| VOC | <500 g/L, complying with the national standard 30981 for solvent-borne container coatings |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Thinner | SC ZINC PRIMER THINNER |
| Mixing Ratio | Base /Hardener =6/1 (by wt.) |
| Colour / Appearance | Iron red or grey |
| SD NON ZINC PRIMER | Epoxy Zinc-free Shop Primer |
|---|
A zinc-free shop primer based on epoxy resin
As shop primer or primer for steel structure, container
Complies with JT/T 810
Quick drying
| Color | Oxide red or Grey |
|---|---|
| Colour | Iron red or grey |
| Mixing ratio | Base /Hardener =6/1 (by wt.) |
| Mixing Ratio | Base/Hardener = 6/1 (by weight) |
| VOC | <500 g/L accord with GB 30981-2020,solvent container paints |
| Volatile organic compound content | <500 g/L, complying with the national standard 30981 for solvent-borne container coatings |
| Film thickness | Dry :30~50 microns/coat Wet:60~100 microns/coat |
| Applied film thickness | Dry film: 30–50 µm/coat; wet film: 60–100 µm/coat |
| Theoretical Coverage | 0.029 kg/m²/10 microns |
| Theoretical Spreading Rate | 0.029 kg/m² per 10 µm |
Practical:Variable on surface conditions, environment, applications method, etc.
| Application Temperature | 5°C-40°C |
|---|
| Pot life | Temperature (°C) | 5 | 10 | 20 | 30 |
| Pot life | Pot life (hrs) | 24 | 16 | 8 | 6 |
| Application Methods | Airless spray, air spray , brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush and roller |
| Nozzle tip size | .019” ~ .023” |
| Nozzle pressure | 10~15 Mpa |
| Thinner | SC ZINC PRIMER THINNER |
|---|
Shop primer thinner
| Drying time & Overcoating interval | Temperature | 5°C | 20°C | 30°C | 80°C |
| Drying time & recoat interval | Touch Dry | 30mins | 15mins | 10mins | -- |
| Dry hard | 6hrs | 3hrs | 1hrs | 5mins | |
| Min interval | 20mins | 15mins | 3mins | ||
| Max interval | -- | ||||
| Applied substrates | Bare steel |
|---|---|
| Subsequent coat | Bare steel |
| Suitable for overcoating | Various of primers |
Various primers
Store in dry, cool conditions, and away from sources of heat & ignition. Containers must be kept
tightly closed.
| Shelf life | 12mouths/25°C |
|---|---|
| Shelf life | 12 months at 25 °C |
Shelf life:Subject to re-inspection thereafter.
| SURFACE REPARATION | Remove salt and other water-soluble contaminants by fresh water hosing. |
|---|---|
| Surface Preparation | Rinse off salts and other water-soluble contaminants with clean water. |
Degrease according to SSPC-SP1 solvent cleaning.
Remove rust, mill-scale and other loose material by abrasive blasting to ISO Sa2.5 (SSPC-SP10) or better.
Remove dust and dirt by high pressure air before paint application
Be sure that the surface is clean and dry prior to application.
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.
Please check this date sheet is current prior to using the product.
| Issued Date | kansai.hk.coscoshipping.com |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
