China-based coatings exporter — industrial & marine protective coatings from China's production bases

SC ZINC PRIMER(S) Epoxy Zinc-rich Shop Primer

Quick Specs

SC ZINC PRIMER epoxy zinc-rich shop primer belongs to zinc-rich primers, epoxy system. As a primer it can be used for steel freight containers. Parameters on this page: theoretical spreading rate 0.048 kg/m². Comparable models of the same brand: EPOFEND ZINC 60 epoxy zinc-rich primer 60, EPOTAINER ZINC 60 epoxy zinc-rich primer 60, SD NON ZINC PRIMER epoxy non-zinc shop primer.

Parameter source: KANSAI original technical data sheet (TDS) for SC ZINC PRIMER(S) Epoxy Zinc-Rich Shop Primer; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.

This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.

Request a Quote

Volume Solids	80%
Dry Film Thickness	—
Theoretical Spreading Rate	0.048 Kg/m2
VOC	<420g/L
Density / Specific Gravity	2.20-2.30
Number of Components	Two-component
Mixing Ratio	Base/Hardener = 12/1 (by wt.)
Pot Life	12hrs
Shelf life	Base:6months Hardener:12months Shel…

Browse Similar Models by CategoryThis model belongs to: Primer, Zinc-rich Primer, Epoxy

Coating Position

Primer Intermediate Coat Topcoat Auxiliary

Functional Category

Zinc-rich Primer Glass Flake Antifouling Heat-resistant Fire Protection Potable Water Tank Cold galvanizing Thermal Insulation

Resin Type

Epoxy Water-borne Polyurethane, fluorocarbon Acrylic Silicone Alkyd Inorganic Zinc Silicate Fluorocarbon Chlorinated Rubber Phenolic Vinyl Ester

SC ZINC PRIMER(S) Product Description	Two-component solvent paint based on solvent epoxy resin and hardener, added zinc dust.

Recommended Use

As primer can be used for steel freight container.

Physical Properties

Color	Grey, reddish or greenish
Mixing ratio	Base/Hardener = 12/1 (by wt.)
Theoretical Volume by Weight,%	80
Specific gravity	2.20-2.30
VOC	<420g/L
Film thickness	Dry:30 microns/coat Wet :62 microns/coat
Theoretical Coverage	0.048Kg/m2/10 microns

Storage

Store in dry, cool conditions, and away from sources of heat & ignition. Containers must be kept tightly closed.

Storage Temperature	5°C-40°C
Shelf life	Base:6months Hardener:12months Shelf life:Subject to re-inspection thereafter.

Application

Application Temperature	5°C-40°C
Pot life	12hrs
Application Methods	Airless spray, air spray , brush , roller
Thinner	SC Zinc Shop Primer Thinner
Drying & Oven schedule	15min@80°C

Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.

How many components does SC have?: SC is a two-component product. Mix it in the ratio given in the Coating Data table on this page before use.
What is the mixing ratio of SC?: The mixing ratio of SC is Base/Hardener = 12/1 (by wt.).
What is the theoretical spreading rate of SC?: The theoretical spreading rate of SC is 0.048 Kg/m2; actual consumption depends on substrate roughness, application losses and colour hiding power.
What is the volume solids of SC?: The volume solids of SC is 80%.
What is the VOC of SC?: The VOC of SC is <420g/L.
Where can I buy SC?: RichTech Industrial Technology (Shanghai) Co., Ltd. distributes industrial and marine coatings; KANSAI KANSAI is one of our regularly stocked brands, with coating selection, system design and quantity calculation support. Address: 10F, Changhui Building, 799 Yinxiang Road, Jiading District, Shanghai, China. Tel: +86 21 5056 8299 (9:00–21:00).

For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.