RETAN 6000 VARNISH 17:3 is a polyurethane paint, used as a topcoat. A varnish based on acrylic polyol resin and polyisocyanate hardener. INTENDED USES: a polyurethane varnish composed of polyol resin and polyisocyanate. Parameters on this page: volume solids 52 ± 2%, theoretical spreading rate 0.039 kg/m². Comparable products of the same brand: ACRIC SC Acrylic Topcoat, RETAN 6000 VARNISH Polyurethane Varnish 6000, RETAN 6000 Polyurethane 6000 Topcoat.
Data source: KANSAI original Technical Data Sheet (TDS), "RETAN 6000 VARNISH 17:3"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 52 ± 2% |
|---|---|
| Dry Film Thickness | 20 µm per coat |
| Theoretical Spreading Rate | 0.039 kg/m2 |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 17 °C |
| Thinner | Polyurethane thinner |
| Mixing Ratio | Base : curing agent = 17:3 (by weight) |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
RETAN 6000 VARNISH
| Retan 6000 Varnish | Polyurethane Clear Coat 6000 |
|---|
A varnish based on acrylic polyol resin and polyisocyanate hardener
| Intended Uses | A polyurethane varnish composed of polyol resin and polyisocyanate. |
|---|
● Excellent durability in chemicals and oil
● Excellent gloss and color retention
● Good applicability
● Provides hardeners, abrasion resistance
● Drying fast
| Basic data: Colour(s) | Clear |
|---|---|
| Colour | transparent |
| Mixing ratio | Base/Hardener=17/3 (by wt.) |
| Mixing ratio | Base : curing agent = 17:3 (by weight) |
| Solids content | 52±2 % |
| Film thickness | Dry : 20 microns/coat Wet : 39 microns/coat |
| Applied film thickness | Dry film: 20 µm/coat; wet film: 39 µm/coat |
| Spreading rate | Theoretical: 0.039kg/ m2/20 microns |
| Spreading rate | Theoretical value: 0.039 kg/m²/20 µm |
Practical: Various depending on surface conditions, environment, applications, etc.
| Shelf temperature | -10°C-40°C |
|---|---|
| Shelf life | 1 year |
| Shelf life | 1 year |
| Flash point | Greater than 17°C |
| Flash point APPLICATION DATA | Above 17 °C |
| Temperature (°C) | 5 | 10 | 20 | 30 | |
| Pot life (hrs) | Pot life | 8 | 6 | 5 | 3 |
Airless spray, air spray, brush and roller
| Airless spray | Recommended | |
| Nozzle tip | Nozzle size | 0.017-0.023 |
| Fluid pressure | Output pressure | 100-150kg/cm² |
| Thinning | Thinning ratio | 0–10% by weight |
| Thinner | Retan Thinner |
|---|---|
| Thinner | Polyurethane thinner |
| Application temperature; Drying time & Overcoating interval | -10°C-40°C |
| Temperature (°C) | Temperature | -5 | 5 | 10 | 20 | 30 |
| Dry to touch (hrs) | Touch dry | 6 | 3 | 2 | 1 | |
| Dry hard (hrs) | Semi-hard dry | 24 | 16 | 12 | 10 | 6 |
| Min. interval (hrs) | Minimum recoat interval | 30 | 24 | 20 | 16 | 12 |
| Max. interval (days) | Maximum recoat interval | - | ||||
| Coating system; Preceding coat | Epomarine EX 500, Super EX 21 AC, Retan Undercoat, or according |
|---|---|
| Suitable for undercoating | to the coating systems of Kansai. |
Epomarine EX 500, Super EX 21 AC, Retan Undercoat, or refer to our recommended coating system.
The primer surface should be clean, dry and free of all contamination.
Observe the overcoating intervals specified for the primer.
| SAFETY PRECAUTIONS | A health and safety data sheet for product is available upon request. |
|---|
RETAN 6000 VARNISH Minimum precautions to be taken in dealing with all paints are:
● Avoid skin and eye contact.
● If paint comes into contact with the skin , wash with warm water and/or a suitable cleanser. If paint comes into contact with the eyes, flush with copious amount of water and seek immediate medical attention.
● Ensure good ventilation.
● Paint products contain flammable materials. Please keep them away from sparks and prohibit any smoking in the vicinity.
● Observe all health and safety data on the container.
The information given on this sheet is to the best of our knowledge and
accurate at the time of printing. Since conditions of use are beyond the manufacture’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.
The information in this data sheet is the most complete and correct data currently available to us. As the conditions of product use are beyond our control, this information carries no warranty, and responsibility to the buyer is limited to the selection of the product. As the company's products and production processes continue to develop, all information herein is subject to our confirmation.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
