RABAMARINE BTD chlorinated rubber topcoat is a chlorinated rubber coating for use as a topcoat. Used as a topcoat on steel structure surfaces, for immersed and non-immersed areas. General-purpose chlorinated rubber topcoat composed of chlorinated rubber resin. Good weather resistance. High resistance to sea water and oil; good resistance to sea water and oil. Excellent abrasion resistance; excellent abrasion resistance. Compatibility with all various coating systems; suitable for various coating systems. Quick drying; fast drying. Parameters on this page: volume solids 46 ± 2%, dry film thickness 30-50 µm/coat, theoretical spreading rate 11.5 m²/L.
Parameter source: KANSAI original technical data sheet (TDS) "RABAMARINE BTD Chlorinated Rubber Topcoat"; spreading rate and other values are converted from TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 46 ± 2% |
|---|---|
| Dry Film Thickness | 30–50 µm per coat |
| Theoretical Spreading Rate | 11.5 m²/L /40 µm |
| VOC | 510 g/L |
| Density / Specific Gravity | — |
| Number of Components | One-component |
| Flash Point | Above 23 °C |
| Thinner | Chlorinated rubber thinner |
| Mixing Ratio | Single-component coating |
| RABAMARINE BTD | Chlorinated rubber topcoat |
|---|
A chlorinated rubber universal finish based on chlorinated rubber.
As a finish for steel structure. in immersion and non immersion areas.
Good weathering properties
| Color | Colors |
|---|---|
| Colour | Various colours |
| Volume Solids | 46±2% |
| VOC | 510g/L |
| Volatile organic compound content | 510 g/L |
| Flash Point | Greater than 23°C |
| Flash Point | Above 23 °C |
| Film thickness | Dry : 30-50 microns/coat Wet :65-109microns/coat |
| Applied film thickness | DFT: 30-50 µm/coat; WFT: 65-109 µm/coat |
| Theoretical Coverage | 11.5m2/Ltr/40 microns |
| Theoretical Spreading Rate | 11.5 m²/L/40 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | -10°C-40°C |
|---|---|
| Mixing | Mix thoroughly with power agitator |
| Mixing | Stir thoroughly with a power tool |
| Mixing Ratio | One component coating |
| Mixing ratio | Single-component coating |
| Application Methods | Airless spray, air spray, brush and roller |
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–10% by weight |
Brush/Roller; Thinning ratio 0–10% by weight
| Thinner | Rabamarine Thinner |
|---|---|
| Thinner | Chlorinated rubber thinner |
| Drying time & | Temperature | -5°C | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 80mins | 60mins | 30mins | 20mins |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 10hrs | 6hrs | 3hrs | 2hrs |
| Min. interval | Minimum recoat interval | 15hrs | 12hrs | 6hrs | 4hrs | |
| Max. interval | Maximum recoat interval |
| Typical Undercoat | Rabamarine AC, Epomarine EX 500 or according to the coating systems of Cosco Kansai. |
|---|---|
| Suitable for undercoating | Rabamarine AC, Epomarine EX 500, or refer to the recommended coating system. |
| Typical topcoat; suitable overcoat | - |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2025/1 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
