China-based coatings exporter — industrial & marine protective coatings from China's production bases

PUSAFE SC Water-borne Polyurethane Topcoat

Quick Specs

PUSAFE SC Waterborne Polyurethane Topcoat is a waterborne coating used as a topcoat. Specifications on this page: volume solids 55-57%, theoretical spreading rate 0.028 Kg/m2. Comparable products of the same brand and type: AMEINCOAT TOPCPAT Waterborne Acrylic Topcoat, RETAN 6000 VARNISH 17:3, PU FINISH 2010 Polyurethane 2010 Topcoat.

Parameter source: KANSAI original technical data sheet (TDS) "PUSAFE SC Water-borne Polyurethane Topcoat"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.

This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.

Request a Quote

Volume Solids	55-57%
Dry Film Thickness	—
Theoretical Spreading Rate	0.028 Kg/m2
VOC	<200g/L
Density / Specific Gravity	1.20-1.25
Number of Components	—
Mixing Ratio	Base/Hardener = 7/1 (by wt.)
Pot Life	4hrs
Shelf life	12months

Browse Similar Models by CategoryThis model belongs to: Topcoat, Water-borne, Polyurethane

Coating Position

Primer Intermediate Coat Topcoat Auxiliary

Functional Category

Zinc-rich Primer Glass Flake Antifouling Heat-resistant Fire Protection Potable Water Tank Cold galvanizing Thermal Insulation

Resin Type

Epoxy Water-borne Polyurethane, fluorocarbon Acrylic Silicone Alkyd Inorganic Zinc Silicate Fluorocarbon Chlorinated Rubber Phenolic Vinyl Ester

PUSAFE SC Product Description	A durable waterborne polyurethane paint based on hydroxyl-acrylic emulsion and isocyanate hardener

Recommended Use

As an exterior topcoat on waterborne paint systems for reffer container.

Physical Properties

Color	Colors
Mixing ratio	Base/Hardener = 7/1 (by wt.)
Theoretical Volume by Weight,%	55-57
Specific gravity	1.20-1.25
VOC	<200g/L
Film thickness	Dry:30-50 microns/coat Wet :60-100 microns/coat
Theoretical Coverage	0.028Kg/m2/10 microns

Storage

Store in dry, cool conditions, and away from sources of heat & ignition. Containers must be kept tightly closed.

Storage Temperature	5°C-35°C
Shelf life	12months

Shelf life:Subject to re-inspection thereafter.

Application

Application Temperature	15°C-35°C
Pot life	4hrs
Application Methods	Airless spray, air spray , brush , roller
Thinner	Water
Drying & Oven schedule	30min@55-70°C Over 8 hours for foaming requirements

Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.

What is the mixing ratio of PUSAFE SC?: The mixing ratio of PUSAFE SC is Base/Hardener = 7/1 (by wt.).
What is the theoretical spreading rate of PUSAFE SC?: The theoretical spreading rate of PUSAFE SC is 0.028 Kg/m2; actual consumption depends on substrate roughness, application losses and colour hiding power.
What is the volume solids of PUSAFE SC?: The volume solids of PUSAFE SC is 55-57%.
What is the VOC of PUSAFE SC?: The VOC of PUSAFE SC is <200g/L.
Where can I buy PUSAFE SC?: RichTech Industrial Technology (Shanghai) Co., Ltd. distributes industrial and marine coatings; KANSAI KANSAI is one of our regularly stocked brands, with coating selection, system design and quantity calculation support. Address: 10F, Changhui Building, 799 Yinxiang Road, Jiading District, Shanghai, China. Tel: +86 21 5056 8299 (9:00–21:00).

For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.