PU FINISH LD-30 is a topcoat. Used for new construction or as a maintenance topcoat. A high-gloss durable finish based on polyurethane. Good weathering resistance and gloss retention. Good application. Fast drying. Parameters on this page: volume solids 54% ± 2%; theoretical spreading rate 13.5 m²/L; number of components: two. Comparable products from the same brand: AMEINCOAT INT, AMEINCOAT RC TOPCOAT, EPOMARINE AE-10 TOPCOAT Oil-resistant Static-conductive Topcoat.
Source: KANSAI original technical data sheet (TDS) 'PU FINISH LD-30'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 54% ± 2% |
|---|---|
| Dry Film Thickness | 30–60 µm per coat |
| Theoretical Spreading Rate | 13.5 m²/L/40 µm |
| VOC | 430 g/L |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 25 °C |
| Thinner | Polyurethane Thinner 2# |
| Mixing Ratio | Base/Hardener=8/1(by weight) |
| PU FINISH LD-30 | Polyurethane Topcoat LD-30 |
|---|
A high gloss durable finish based on polyurethane.
As a finish can be used in new construction situations and l maintenance finish.
Complies with HG/T 2454-2014
Good weathering resistance and gloss retention
| Color | White and Colors |
|---|---|
| Colour | White and various colours |
| Gloss | High gloss |
| Gloss | High gloss |
| Volume Solids | 54%±2% |
| VOC | 430g/L |
| Volatile organic compound content | 430 g/L |
| Flash Point | Greater than 25°C |
| Flash Point | Above 25 °C |
| Film thickness | Dry : 30-60µm /coat Wet : 55-110µm /coat |
| Applied film thickness | Dry film: 30–60 µm per coat; wet film: 55–110 µm per coat |
| Theoretical Coverage | 13.5m2/l/40µm |
| Theoretical Spreading Rate | 13.5 m²/L/40 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | -5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=8/1(by weight) |
| Mixing ratio | Base : curing agent = 8:1 (by weight) |
| Pot Life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 16hrs | 12hrs | 8hrs | 4hrs |
| Application Methods | Airless spray, air spray brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush and roller |
| Nozzle tip | Nozzle size | 0.33mm-0.43mm |
| Nozzle pressure | Output pressure | ≥10MPa |
| Thinning ratio | 15–30% by volume |
Brush/Roller; Thinning ratio 15–30% by volume
| Thinner | Retan Thinner 2# |
|---|---|
| Thinner | Polyurethane Thinner 2# |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C |
| Overcoating interval | Surface dry | 100mins | 90mins | 60mins | 30mins |
| Drying time & recoat interval | Touch dry | 16hrs | 12hrs | 4hrs | 2hrs |
| Min. interval | Minimum recoat interval | 24hrs | 20hrs | 8hrs | 4hrs |
| Max. interval | Maximum recoat interval | - | |||
| Typical undercoat | Epomarine EX 600, Epofend Undercoat or according to the coating systems of COSCO |
|---|---|
| Suitable for undercoating | Kansai |
Epomarine EX 600, epoxy intermediate coat, or refer to the company's recommended coating system
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the
time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development. Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2020/03 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
