FLON FINISH HS-50 fluorocarbon topcoat HS-50 is a fluorocarbon coating used as a topcoat. Including offshore structures, wind towers and bridges: used as a topcoat on steel structure surfaces in severe industrial corrosive environments, including offshore steel structures, wind turbine towers and bridges. Isocyanate hardener: a weather-resistant fluororesin coating cured with a non-yellowing isocyanate. Parameters on this page: volume solids 66% ± 2%, dry film thickness 25-50 µm per coat, theoretical spreading rate 16.5 m²/L. Comparable products from the same brand: FLON FINISH CT-50 fluorocarbon topcoat CT-50, ACRIC SC acrylic topcoat, EPOMARINE BTD epoxy topcoat.
Parameter source: KANSAI original technical data sheet (TDS) “FLON FINISH HS-50 Fluorocarbon Topcoat HS-50”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 66% ± 2% |
|---|---|
| Dry Film Thickness | 25–50 µm per coat |
| Theoretical Spreading Rate | 16.5 m²/L /40 µm |
| VOC | 340 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 26 °C |
| Thinner | Fluorocarbon topcoat thinner |
| Mixing Ratio | Base/Hardener=10/1(by weight) |
| FLON FINISH HS-50 | Fluorocarbon Topcoat HS-50 |
|---|
A weather resisting fluoro resin paint based on fluoro resin and non-yellowing
As a finish can be used in steel structure at industrial severe corrosive environments
Complies with JIS K 5659:2008, JT/T 722-2008, TB/T 1527-2004, HG/T 3792-2005
Excellent color and gloss retention.
| Color | Colors |
|---|---|
| Colour | Various colours |
| Gloss | High gloss |
| Gloss | High gloss |
| Volume Solids | 66%±2% |
| VOC | 340g/L,accord with EU Dircrtive2004/42/EC, subcategory j |
| Volatile organic compound content | 340 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 26°C |
| Flash Point | Above 26 °C |
| Film thickness | Dry : 25-50µm/coat Wet : 38-76µm/coat |
| Applied film thickness | Dry film: 25–50 µm/coat Wet film: 38–76 µm/coat |
| Theoretical Coverage | 16.5m2/L/40microns |
| Theoretical Spreading Rate | 16.5 m²/L/40 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 0°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=10/1(by weight) |
| Mixing ratio | Base/curing agent = 10/1 (by weight) |
| Pot Life | 5°C | 20°C | 30°C |
| Pot life | 5hrs | 2hrs | |
| Application Methods | Airless spray, air spray brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush and roller |
| Nozzle tip | Nozzle size | 0.33mm-0.43mm |
| Nozzle pressure | Output pressure | ≥10MPa |
| Thinning ratio | 0–20% by volume |
Brush/Roller; Thinning ratio 0–20% by volume
| Thinner | Kanpe Flon Topcoat Thinner |
|---|---|
| Thinner | Fluorocarbon topcoat thinner |
| Drying time & | Temperature | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 1hr | 15mins | 10mins |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 4hrs | 2hrs | 1hr |
| Min. interval | Minimum recoat interval | 24hrs | 10hrs | ||
| Max. interval | Maximum recoat interval | 7days | |||
| Typical undercoat | Kanpe Flon Undercoat or according to the coating system of COSCO Kansai. |
|---|---|
| Suitable for undercoating | Fluorocarbon intermediate coat or refer to COSCO KANSAI coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the
time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development. Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2020/05 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
