FLON FINISH CT-50 fluorocarbon topcoat CT-50 is a fluorocarbon coating used as a topcoat. Outdoor corrosion resistant, suitable for UL 50E enclosures. Used as a topcoat on steel structures and container surfaces in severe corrosive environments. A weather-resistant fluororesin coating cured with a non-yellowing isocyanate. Parameters on this page: dry film thickness 25-50 µm per coat, theoretical spreading rate 0.022 kg/m²/10 µm, number of components: two-component. Comparable products from the same brand: FLON FINISH HS-50 fluorocarbon topcoat HS-50, ACRIC SC acrylic topcoat, EPOMARINE BTD epoxy topcoat.
Source: KANSAI original technical data sheet (TDS) "FLON FINISH CT-50 Fluorocarbon Topcoat CT-50"; spreading rate and other values are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 65% |
|---|---|
| Dry Film Thickness | 25–50 µm per coat |
| Theoretical Spreading Rate | 0.022 kg/m²/10 µm |
| VOC | 340 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 26 °C |
| Thinner | Fluorocarbon topcoat thinner |
| Mixing Ratio | Base/Hardener=10/1(by weight) |
| FLON FINISH CT-50 Fluorocarbon Topcoat CT-50 PRODUCT DESCRIPTION | A weather resisting fluoro resin paint based on fluoro resin and non-yellowing isocyanate hardener. |
|---|---|
| Product Description | A weather-resistant fluoropolymer coating cured with a non-yellowing isocyanate |
As a finish can be used in steel structure and container surface at severe corrosive environments.
Complies with JIS K 5659:2008, JT/T 722-2008, TB/T 1527-2004, HG/T 3792-2005,UL50E
Excellent color and gloss retention.
| Color | Colors |
|---|---|
| Colour | Various colours |
| Gloss | High gloss |
| Gloss; Volume Solids | High gloss |
| Volume Solids | 65% |
| VOC | 340g/L,accord with EU Dircrtive2004/42/EC, subcategory j |
| Volatile organic compound content | 340 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 26°C |
| Flash Point | Above 26 °C |
| Film thickness | Dry : 25-50µm/coat Wet : 40-80µm/coat |
| Applied film thickness | Dry film: 25–50 µm/coat; wet film: 40–80 µm/coat |
| Theoretical Coverage | 0.022Kg/m2/10µm |
| Theoretical Spreading Rate | 0.022 kg/m²/10 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 0°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=10/1(by weight) |
| Mixing ratio | Base/curing agent = 10/1 (by weight) |
| Pot Life | 5°C | 20°C | 30°C |
| Pot life | 5hrs | 2hrs | |
| Application Methods | Airless spray, air spray brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush and roller |
| Nozzle tip | Nozzle size | 0.33mm-0.43mm |
| Nozzle pressure | Output pressure | ≥10MPa |
| Thinning ratio | 0–20% by volume |
Brush/Roller; Thinning ratio 0–20% by volume
| Thinner | Kanpe Flon Topcoat Thinner |
|---|---|
| Thinner | Fluorocarbon topcoat thinner |
| Drying time & | Temperature | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 1hr | 15mins | 10mins |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 4hrs | 2hrs | 1hr |
| Min. interval | Minimum recoat interval | 24hrs | 10hrs | ||
| Max. interval | Maximum recoat interval | 7days | |||
| Typical undercoat | EPOTAINER EX(M) or according to the coating system of COSCO Kansai. |
|---|---|
| Suitable for undercoating | Epoxy MIO High-build EX(M), or refer to COSCO KANSAI coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of issuing.
Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development. Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2023/9 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
