EPOTECT EX Epoxy High-Build EX is an epoxy coating. Used on new steel structure surfaces in medium to high industrial corrosive environments, only as an intermediate coat. It is a low-VOC, high-solids, two-component high-build epoxy coating. Low VOC content, high solids. High-build applicability: excellent thick-film application performance. Excellent adhesion to zinc-rich primer and polyurethane finish. Parameters on this page: volume solids 81% ± 2%, dry film thickness 75-200 µm/coat, theoretical spreading rate 8.1 m²/L.
Parameter source: KANSAI original technical data sheet (TDS) for EPOTECT EX (U) Epoxy High-Build EX(U); spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 81% ± 2% |
|---|---|
| Dry Film Thickness | 75–200 µm per coat |
| Theoretical Spreading Rate | 8.1 m²/L per 100 µm |
| VOC | 236 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 23 °C |
| Thinner | Epoxy Thinner 20# |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| EPOTECT EX (U) | High-Build Epoxy EX (U) |
|---|
A low VOC, high solids, two pack high build epoxy coating
Only as a intermediate coat can be used in steel structure at industrial moderately to
Complies with GB/T 28699-2012,Complies with JT/T 722-2008
Low VOC, high volume solids
| Color | Grey |
|---|---|
| Colour | Grey |
| Volume Solids | 81%±2% |
| VOC | 236g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 236 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 23°C |
| Flash Point | Above 23 °C |
| Film thickness | Dry : 75-200 µm/coat Wet : 93-247µm/coat |
| Applied film thickness | DFT: 75–200 µm per coat; WFT: 93–247 µm per coat |
| Theoretical Coverage | 8.1m2/L/100microns |
| Theoretical spreading rate | 8.1 m²/L per 100 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| Mixing ratio | Base : curing agent = 9:1 (by mass) |
| Pot life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 8hrs | 6hrs | 3hrs | |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush and roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥15Mpa |
| Thinner | Epomarine Thinner 20# |
|---|---|
| Thinner | Epoxy Thinner 20# |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 5hrs | 4hrs | 3hrs | 2hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 48hrs | 24hrs | 16hrs | 12hrs |
| Min. interval | Minimum recoat interval | 48hrs | 36hrs | 24hrs | 16hrs | |
| Max. interval | Maximum recoat interval | 7days | ||||
| Typical undercoat | SD Zinc 500, Epofend Zinc 60 etc. |
|---|---|
| Suitable for undercoating | Epoxy zinc-rich coating 500, epoxy zinc-rich 60, and similar |
| Typical topcoat | Retan 6000, Kanpe Flon HD or according to the coating system of Cosco Kansai. |
| Suitable for overcoating | Polyurethane Topcoat 6000, fluorocarbon topcoat, or refer to our coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at
the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2020/05 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
