EPOTECT EX epoxy MIO high-build coating EX is an epoxy coating used as an intermediate coat. For corrosive environments of new construction and maintenance: for new steel structure surfaces in moderate to severe industrial corrosive environments, as a primer or intermediate coat. A low-VOC, high-solids, two-component high-build epoxy coating. Parameters on this page: volume solids 76 ± 2%, dry film thickness 75-200 µm per coat, theoretical spreading rate 5.07 m²/L.
Data source: KANSAI original Technical Data Sheet (TDS), "EPOTECT EX (M) Epoxy MIO High-build Paint EX (M)"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 76 ± 2% |
|---|---|
| Dry Film Thickness | 75–200 µm per coat |
| Theoretical Spreading Rate | 5.07 m²/L/150 µm |
| VOC | 278 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 20 °C |
| Thinner | Epoxy Thinner 20# |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| EPOTECT EX(M) | Epoxy MIO High-Build EX (M) |
|---|
A low VOC, high solids, two packs high build epoxy coating.
As a primer or intermediate coat can be used in steel structure at industrial moderately to severe
Complies with JT/T 722-2008, GB/T 28699-2012
Low VOC, High volume solids
| Color | Grey |
|---|---|
| Colour, Volume Solids | Grey |
| Volume Solids | 76±2% |
| VOC | 278g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 278 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 20°C |
| Flash Point | Above 20 °C |
| Film thickness | Dry : 75-200 µm/coat Wet : 98-263µm/coat |
| Applied film thickness | DFT: 75–200 µm per coat; WFT: 98–263 µm per coat |
| Theoretical Coverage | 5.07 m2/Ltr/150 microns |
| Theoretical Spreading Rate | 5.07 m²/L/150 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| Mixing ratio | Base : curing agent = 9:1 (by weight) |
| Pot Life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 8hrs | 6hrs | 3hrs | |
| Application Methods | Airless spray, air spray brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush and roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥15MPa |
| Thinner | Epomarine Thinner 20# |
|---|---|
| Thinner | Epoxy Thinner 20# |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 5hrs | 4hrs | 3hrs | 2hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 48hrs | 24hrs | 16hrs | 12hrs |
| Min. interval | Minimum recoat interval | 48hrs | 36hrs | 24hrs | 16hrs | |
| Max. interval | Maximum recoat interval | 7days | ||||
| Applied Substrate | Bare steel, SD Zinc 500, Epofend Zinc 60 etc. |
|---|---|
| Suitable substrates | Bare steel, epoxy zinc-rich coating 500, epoxy zinc-rich coating 60 etc. |
| Typical topcoat | PU Finish HS-50, PU Finish 2010, Flon Finish HS-50 or according to the coating system of COSCO |
| Suitable for overcoating | Kansai. |
Polyurethane topcoat HS-50, polyurethane topcoat 2010, fluorocarbon topcoat HS-50 or refer to COSCO Kansai coating system
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of issuing.
Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development. Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2020/12 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
