EPOTAINER MIO 30 epoxy interior topcoat MIO-30 is an epoxy coating used as an intermediate coat. Used as an anti-corrosive interior topcoat for steel containers. A two-component high-build epoxy coating for the interior surfaces of steel containers. Excellent high-build application properties, excellent anti-corrosive performance, a tough and strong film, good adhesion, and good resistance to impact and acids and alkalis. Parameters on this page: dry film thickness 75-125 µm per coat, theoretical spreading rate 0.236 kg/m²/100 µm, number of components: two-component.
Parameter source: KANSAI original technical data sheet (TDS) "EPOTAINER MIO 30 Epoxy Interior Topcoat MIO-30"; values such as spreading rate are converted from TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | 75–125 µm per coat |
| Theoretical Spreading Rate | 0.236 kg/m²/100 µm |
| VOC | <300 g/L, complying with the national standard 30981 for solvent-borne container coatings |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Thinner | Epoxy thinner |
| Mixing Ratio | Base/Hardener=10/1(by weight) |
| Colour / Appearance | Grey |
| EPOTAINER MIO-30 | Epoxy Interior Topcoat MIO-30 |
|---|
A ltwo pack high build epoxy coating for interior of steel container.
Rust preventive interior topcoat of steel container
Tested for non-contamination for grain cargo.FDA certifiacation.Complies with JT/T 810
High-build applicability
| Color | Grey |
|---|---|
| Colour | Grey |
| VOC | <300g/L,accord with GB 30981-2020,solvent container paints |
| Volatile organic compound content | <300 g/L, complying with the national standard 30981 for solvent-borne container coatings |
| Film thickness | Dry : 75-125 µm/coat Wet : 113-189µm/coat |
| Applied film thickness | Dry film: 75–125 µm/coat; wet film: 113–189 µm/coat |
| Theoretical Coverage | 0.236kg/m²/100 microns |
| Theoretical spreading rate | 0.236 kg/m²/100 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=10/1(by weight) |
| Mixing ratio | Base/curing agent = 10/1 (by weight) |
| Pot life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 6hrs | 4hrs | ||
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush and roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥15Mpa |
| Thinner | Epomarine Thinner |
|---|---|
| Thinner | Epoxy thinner |
| Drying time & | Temperature | 5°C | 20°C | 30°C | 80°C | |
| Overcoating interval | Touch dry | Surface Dry | 5hrs | 2hrs | 1.5hrs | |
| Drying time & recoat interval | Hard dry | Semi-hard dry | 16hrs | 10hrs | 8hrs | 15mins |
| Min. interval | Minimum recoat interval | 40mins | 30mins | 15mins | ||
| Max. interval | Maximum recoat interval | 7days | ||||
| Typical undercoat | SC ZINC PRIMER(S), SD NON ZINC RPIMER etc. |
|---|---|
| Suitable undercoat Typical topcoat Suitable overcoat | Epoxy zinc-rich primer, zinc-free epoxy shop primer, etc. |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2021/05 kansai.hk.coscoshipping.com |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
