EPOTAINER EX Epoxy High-build Coating EX belongs to epoxy coatings. corrosive environments and container surface. Outdoor Corrosion Resistant suitable for UL 50E enclosures. For surfaces of new-build steel structures and containers in medium to high corrosivity environments; may be used as intermediate coat only. A low-VOC, high-solids, two-component high-build epoxy coating. Parameters on this page: DFT 75–200 µm/coat, theoretical spreading rate 0.020 kg/m²/10 µm, number of components two-component.
Parameter source: KANSAI original technical data sheet (TDS) "EPOTAINER EX (U) Epoxy High-build Coating EX(U)"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 76% |
|---|---|
| Dry Film Thickness | 75–200 µm per coat |
| Theoretical Spreading Rate | 0.020 kg/m² per 10 µm |
| VOC | 236 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 23 °C |
| Thinner | Epoxy Thinner 20# |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| EPOTAINER EX (U) | High-Build Epoxy EX (U) |
|---|
A low VOC, high solids, two pack high build epoxy coating
Only as a intermediate coat can be used in steel structure at moderately to severe
UL50E certified
Low VOC, high volume solids
| Color | Grey |
|---|---|
| Colour | Grey |
| Volume Solids | 76% |
| VOC | 236g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 236 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 23°C |
| Flash Point | Above 23 °C |
| Film thickness | Dry : 75-200 µm/coat Wet : 100-260µm/coat |
| Applied film thickness | DFT: 75–200 µm/coat WFT: 100–260 µm/coat |
| Theoretical Coverage | 0.020 Kg/m2/10 microns |
| Theoretical spreading rate | 0.020 kg/m² per 10 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| Mixing ratio | Base : curing agent = 9:1 (by mass) |
| Pot life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 8hrs | 6hrs | 3hrs | |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush and roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥15Mpa |
| Thinner | Epomarine Thinner 20# |
|---|---|
| Thinner | Epoxy Thinner 20# |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 5hrs | 4hrs | 3hrs | 2hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 48hrs | 24hrs | 16hrs | 12hrs |
| Min. interval | Minimum recoat interval | 48hrs | 36hrs | 24hrs | 16hrs | |
| Max. interval | Maximum recoat interval | 7days | ||||
| Typical undercoat | EPOTAINER Zinc 60 etc. |
|---|---|
| Suitable for undercoating | Epoxy zinc-rich primer 60. |
| Typical topcoat | PU FINISH CT-30 or according to the coating system of Cosco Kansai. |
| Suitable for overcoating | Polyurethane topcoat CT-30 or refer to our coating systems |
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at
the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2023/9 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
