EPOTAINER EX EPOTAINER EX epoxy MIO high-build coating EX (M is an epoxy coating used as an intermediate coat. For environments and container surfaces of new construction and maintenance: outdoor corrosion resistant, suitable for UL 50E enclosures. For new-build steel structures and container surfaces in moderate to severe corrosive environments, as a primer or intermediate coat. A low-VOC, high-solids, two-component high-build epoxy coating. Parameters on this page: dry film thickness 75-200 µm per coat, theoretical spreading rate 0.020 kg/m²/10 µm, number of components: two-component.
Source: KANSAI original technical data sheet (TDS) 'EPOTAINER EX (M) Epoxy MIO High-build Paint EX(M)'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 75% |
|---|---|
| Dry Film Thickness | 75–200 µm per coat |
| Theoretical Spreading Rate | 0.020 kg/m² per 10 µm |
| VOC | 278 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 20 °C |
| Thinner | Epoxy Thinner 20# |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| EPOTAINER EX(M) | Epoxy MIO High-Build EX (M) |
|---|
A low VOC, high solids, two packs high build epoxy coating.
As a primer or intermediate coat can be used in steel structure at moderately to severe corrosive
UL50E certified
Low VOC, High volume solids
| Color | Grey |
|---|---|
| Colour, Volume Solids | Grey |
| Volume Solids | 75% |
| VOC | 278g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 278 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 20°C |
| Flash Point | Above 20 °C |
| Film thickness | Dry : 75-200 µm/coat Wet : 100-270µm/coat |
| Applied film thickness | Dry film: 75–200 µm per coat; wet film: 100–270 µm per coat |
| Theoretical Coverage | 0.020Kg/m2/10µm |
| Theoretical Spreading Rate | 0.020 kg/m² per 10 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| Mixing ratio | Base : curing agent = 9:1 (by weight) |
| Pot Life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 8hrs | 6hrs | 3hrs | |
| Application Methods | Airless spray, air spray brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush and roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥15MPa |
| Thinner | Epomarine Thinner 20# |
|---|---|
| Thinner | Epoxy Thinner 20# |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 5hrs | 4hrs | 3hrs | 2hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 48hrs | 24hrs | 16hrs | 12hrs |
| Min. interval | Minimum recoat interval | 48hrs | 36hrs | 24hrs | 16hrs | |
| Max. interval | Maximum recoat interval | 7days | ||||
| Applied Substrate | Bare steel, EPOTAINER Zinc 60 etc. |
|---|---|
| Suitable substrates | Bare steel, Epoxy Zinc-Rich Primer 60 and others |
| Typical topcoat | PU Finish CT-50, or according to the coating system of COSCO Kansai. |
| Suitable for overcoating | Polyurethane Topcoat CT-50, or refer to COSCO Kansai coating systems |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of issuing.
Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development. Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2023/9 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
