EPOMARINE TR PRIMER is a primer. A polyamide-cured high-build modified epoxy. Suitable for high-build application. Tough and hard, with very good abrasion resistance. Quick drying. Good adhesion to zinc primer. Parameters on this page: dry film thickness 50-100 µm/coat, theoretical spreading rate 0.147 kg/m²/60 µm, number of components: two-component. Comparable models from the same brand: ALKFEND PRIMER 30 alkyd primer 30, AMEINCOAT PRIMER, AMEINCOAT RC PRIMER.
Parameter source: KANSAI original technical data sheet (TDS) for EPOMARINE TR PRIMER; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | 50–100 µm per coat |
| Theoretical Spreading Rate | 0.147 kg/m²/60 µm |
| VOC | 350 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 20 °C |
| Thinner | Epoxy thinner |
| Mixing Ratio | Base/Hardener=27.6/2.4(by weight) |
| EPOMARINE TR PRIMER | Epoxy primer for special-purpose vehicles |
|---|
A high-build modified epomarine epoxy coating with polyamide hardener.
For trailer
Obtainable thicker coating
| Colour; Volume Solids | White, Grey |
|---|---|
| VOC | 350g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 350 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 20°C |
| Flash Point | Above 20 °C |
| Film thickness | Dry 50-100microns/coat Wet : 86-172microns/coat |
| Applied film thickness | Dry film: 50-100 µm/coat; wet film: 86-172 µm/coat |
| Theoretical Coverage | 0.147kg/m²/60 microns |
| Theoretical Spreading Rate | 0.147 kg/m²/60 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=27.6/2.4(by weight) |
| Mixing ratio | Base/curing agent = 27.6/2.4 (by weight) |
| Pot Life | 10°C | 20°C | 30°C |
| Pot life | 16hrs | 8hrs | 6hrs |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–10% by weight |
Brush/Roller; Thinning ratio 0–10% by weight
| Thinner | Epomarine Thinner |
|---|---|
| Thinner | Epoxy thinner |
| Drying time & Overcoating interval | Drying time & Surface dry | Drying time & touch dry | 5°C 5hrs | 20°C 1.5hrs | 30°C 1hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 16hrs | 8hrs | 6hrs |
| Min. interval | Minimum recoat interval | 16hrs | 8hrs | 6hrs | |
| Max. interval | Maximum recoat interval | 7days | |||
| Typical undercoat | TR Zinc Primer |
|---|---|
| Suitable substrates | Zinc-rich coating for trailers |
| Typical topcoat | Retan 6000 |
| Suitable for overcoating | Polyurethane topcoat for trailers 6000. |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | Base:6 months from date of production (25°C) |
|---|---|
| Shelf life | Base: 6 months from date of manufacture (25 °C) |
Hardener:12 months from date of production (25°C)
The information given on this sheet is to the best of our knowledge and accurate at
the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2014/12 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
