EPOMARINE SEALER PRIMER LV epoxy sealer primer is an epoxy coating used as a primer. For severe corrosive environments: used in moderate to severe corrosive environments as a sealer for inorganic zinc coatings or thermal zinc spray substrates/coatings. A two-component polyamide-cured epoxy coating with excellent penetration into porous primers such as inorganic zinc primers. Excellent penetration and tough, strong films. Parameters on this page: volume solids 36% ± 2%, dry film thickness 40-60 µm per coat, theoretical spreading rate 9.0 m²/L.
Parameter source: KANSAI original technical data sheet (TDS) EPOMARINE SEALER PRIMER LV Epoxy Sealer Primer; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 36% ± 2% |
|---|---|
| Dry Film Thickness | 40–60 µm per coat |
| Theoretical Spreading Rate | 9.0 m²/L /40 µm |
| VOC | 520 g/L |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 23 °C |
| Thinner | Epoxy Thinner 20# |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| EPOMARINE SEALER PRIMER LV | Epoxy Sealer Primer |
|---|
A two-component polyamide cured epoxy paint with excellent penetrating
As a sealer to apply on cured inorganic zinc coating or hot zinc spray in moderate to
Complies with JT/T 722-2008
Excellent penetrating performance
| Color | Grey |
|---|---|
| Colour | Grey |
| Volume Solids | 36%±2% |
| VOC | 520g/L |
| Volatile organic compound content | 520 g/L |
| Flash Point | Greater than 23°C |
| Flash Point | Above 23 °C |
| Film thickness | Dry:40-60 microns/coat Wet :111-167microns/coat |
| Applied film thickness | Dry film: 40–60 µm/coat Wet film: 111–167 µm/coat |
| Theoretical Coverage | 9.0m2/L/40 microns |
| Theoretical spreading rate | 9.0 m²/L/40 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| Mixing ratio | Base : curing agent = 9:1 (by mass) |
| Pot life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 4hrs | 3hrs | 2hrs | |
| Application Methods | Airless spray, air spray |
|---|---|
| Application Methods | Airless spray, air spray |
Airless spray
| Nozzle tip | Nozzle size | 0.33mm-0.43mm |
| Nozzle pressure | Output pressure | ≥15Mpa |
| Thinning ratio | 5–10% by volume |
| Thinner | Epomarine Thinner 20# |
|---|---|
| Thinner | Epoxy Thinner 20# |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 2hrs | 1hrs | ||
| Drying time & recoat interval | Touch dry | Semi-hard dry | 8hrs | 6hrs | 4hrs | 2hrs |
| Min. interval | Minimum recoat interval | 30hrs | 16hrs | 12hrs | ||
| Max. interval | Maximum recoat interval | -- | ||||
| Typical undercoat | SD Zinc 1500N, metal zinc spray |
|---|---|
| Suitable for undercoating | Inorganic Zinc-Rich Primer 1500N, hot-sprayed zinc |
| Typical topcoat | Universal EP-60 or according to the coating system of Cosco Kansai. |
| Suitable for overcoating | General-purpose epoxy EP-60, or refer to our coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at
the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development. Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2020/05 www.kansai.com.cn |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
