EPOMARINE SC PRIMER epoxy primer is an epoxy coating used as a primer. Used as an intermediate coat for steel containers, steel tanks, trailers and similar. A polyamide-cured modified epoxy anti-corrosive coating. Excellent anti-corrosive performance, good adhesion, good resistance to impact and abrasion, and good workability. Parameters on this page: dry film thickness 40-60 µm per coat, theoretical spreading rate 0.025 kg/m²/10 µm, number of components: two-component.
Parameter source: KANSAI manufacturer's Technical Data Sheet (TDS) "EPOMARINE SC PRIMER Epoxy Primer"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | 40–60 µm per coat |
| Theoretical Spreading Rate | 0.025 kg/m²/10 µm |
| VOC | <400 g/L, complying with the national standard 30981 for solvent-borne container coatings |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Thinner | Epoxy thinner |
| Mixing Ratio | Base/Hardener = 182/18 (by wt.) |
| Colour / Appearance | Red and grey |
| EPOMARINE SC PRIMER | Epoxy primer |
|---|
A polyamide cured modified epoxy anti-corrosive paint
As a middle primer can be used in steel container, steel tank, trailer, etc.
Excellent corrosive resistance
| Color | Red and Grey |
|---|---|
| Colour | Red and grey |
| Mixing ratio | Base/Hardener = 182/18 (by wt.) |
| Mixing Ratio | Base/Hardener = 182/18 (by weight) |
| VOC | <400 g/L accord with GB 30981-2020,solvent container paints |
| Volatile organic compound content | <400 g/L, complying with the national standard 30981 for solvent-borne container coatings |
| Film thickness | Dry :40~60 microns/coat Wet:67~100 microns/coat |
| Applied film thickness | Dry film: 40–60 µm/coat Wet film: 67–100 µm/coat |
| Theoretical Coverage | 0.025 kg/m²/10 microns |
| Theoretical Spreading Rate | 0.025 kg/m²/10 µm |
Practical:Variable on surface conditions, environment, applications method, etc.
| Application Temperature | 5°C-40°C |
|---|
| Pot life | Temperature (°C) | 5 | 10 | 20 | 30 |
| Pot life (hrs) | 24 | 16 | 8 | 6 |
| Application Methods | Airless spray, air spray , brush and roller |
|---|
Airless spray, air spray, brush and roller
| Nozzle tip size | .017” ~ .021” |
| Nozzle pressure | 10~15 Mpa |
| Thinner | Epomarine thinner |
|---|---|
| Thinner | Epoxy thinner |
| Drying time & Overcoating | Temperature | 5°C | 20°C | 30°C | 80°C |
| interval Drying Time & Overcoating Interval | Dry to touch | 4hrs | 2hrs | 1hr | |
| Dry hard | 16hrs | 10hrs | 8hrs | 15mins | |
| Min interval | 40mins | 30mins | 5mins | ||
| Max interval | 7days | ||||
| Coating system; Preceding coat | SC zinc primer |
|---|---|
| Suitable for undercoating | Epoxy Zinc-Rich Primer |
| Subsequent coat | Acrylic, Rabamarine and Retan RC, or according to the coating system of Cosco-Kansai. |
| Suitable for overcoating | Acrylic, chlorinated rubber or polyurethane RC topcoat, or refer to the company's coating systems |
Store in dry, cool conditions, and away from sources of heat & ignition. Containers must be kept
tightly closed.
| Shelf life | Base:12mouths/25°C Hardener:12mouths/25°C |
|---|---|
| Shelf life | Base: 12 months/25°C Hardener: 12 months/25°C |
Shelf life:Subject to re-inspection thereafter.
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development. Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
2021/05
| Issue date | kansai.hk.coscoshipping.com |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
