EPOMARINE HB High-Build Epoxy Topcoat belongs to Epoxy and is used as a topcoat. For exteriors and interiors of ship. It is a two-component polyamide-cured high-build epoxy topcoat. Parameters on this page: volume solids 66 ± 2%, dry film thickness 75–125 µm/coat, theoretical spreading rate 6.6 m²/L. Comparable models from the same brand: EPOMARINE BTD Epoxy Topcoat, ACRIC SC Acrylic Topcoat, AMEINCOAT TOPCPAT.
Parameter source: KANSAI original technical data sheet (TDS) “EPOMARINE HB High-Build Epoxy Topcoat”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 66 ± 2% |
|---|---|
| Dry Film Thickness | 75–125 µm per coat |
| Theoretical Spreading Rate | 6.6 m²/L per 100 µm |
| VOC | 480 g/L |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 21 °C |
| Thinner | Epoxy Thinner #20 |
| Mixing Ratio | Base/Hardener=5.5/1(by weight) |
| EPOMARINE HB | High-Build Epoxy Topcoat |
|---|
A two pack polyamide cured hi-build epoxy finish.
For exteriors and interiors of ship
Super tough and strong films
| Color | Colors |
|---|---|
| Colour | Various colours |
| Gloss | Semi-Gloss |
| Gloss | Matt |
| Volume Solids | 66±2% |
| VOC | 480g/L |
| Volatile organic compound content | 480 g/L |
| Flash Point | Greater than 21°C |
| Flash Point | Above 21 °C |
| Film thickness | Dry 75-125 microns/coat Wet :113-190microns/coat |
| Applied film thickness | Dry film: 75–125 µm/coat Wet film: 113–190 µm/coat |
| Theoretical Coverage | 6.6m2/Ltr/100 microns |
| Theoretical spreading rate | 6.6 m²/L per 100 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=5.5/1(by weight) |
| Mixing ratio | Base/curing agent = 5.5/1 (by weight) |
| Pot life | 5°C | 20°C | 30°C |
| Pot life | 12hrs | 8hrs | 6hrs |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.33mm-0.43mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–5% by volume |
Brush/Roller; Thinning ratio 5–10% by volume
| Thinner | Epomarine Thinner #20 |
|---|---|
| Thinner | Epoxy Thinner #20 |
| Drying time & | Temperature | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 3hrs | 2hrs | |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 30hrs | 16hrs | 12hrs |
| Min. interval | Minimum recoat interval | 30hrs | 16hrs | 12hrs | |
| Max. interval | Maximum recoat interval | ||||
| Typical undercoat | Epofend EX,or according to the coating system of COSCO Kansai. |
|---|---|
| Suitable undercoat Typical topcoat Suitable overcoat | Epoxy Thinner EX or refer to our coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2024/10 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
