EPOMARINE GX epoxy coating GX is an epoxy coating used as a primer. Protects galvanised steel and light metal surfaces. Based on epoxy resin. Parameters on this page: volume solids 53 ± 2%, dry film thickness 50-100 µm per coat, theoretical spreading rate 10.6 m²/L. Comparable products from the same brand: EPOTECT GX anti-corrosive primer, METALCARE AC abrasion-resistant epoxy coating AC, AMEINCOAT ZINC PRIMER.
Parameter source: KANSAI original Technical Data Sheet (TDS) 'EPOMARINE GX Epoxy Paint GX'; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 53 ± 2% |
|---|---|
| Dry Film Thickness | 50–100 µm per coat |
| Theoretical Spreading Rate | 10.6 m²/L / 50 µm |
| VOC | 418 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 19 °C |
| Thinner | Epoxy thinner |
| Mixing Ratio | Base/Hardener=6.5/1(by volume) |
| EPOMARINE GX | Epoxy GX |
|---|
A rust preventive primer based on epoxy resin, amine adduct and special additives.
For the protection of galvanized steel or light metal surfaces.
Excellent adhesion to light metal and galvanized steel
| Color | Grey and Oxide Red |
|---|---|
| Colour | Grey and iron red |
| Volume Solids | 53±2% |
| VOC | 418g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 418 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 19°C |
| Flash Point | Above 19 °C |
| Film thickness | Dry 50-100 microns/coat Wet : 94-188microns/coat |
| Applied film thickness | Dry film: 50–100 µm/coat; wet film: 94–188 µm/coat |
| Theoretical Coverage | 10.6m2/L/50 microns |
| Theoretical spreading rate | 10.6 m²/L/50 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=6.5/1(by volume) |
| Mixing ratio | Base/Hardener = 6.5/1 (by volume) |
| Pot life | 5°C | 20°C | 30°C |
| Pot life | 16hrs | 8hrs | 6hrs |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, roller |
| Nozzle tip | Nozzle size | 0.33mm-0.43mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–5% by volume |
Brush/roller application; thinning ratio 5–10% by volume.
| Thinner | Epomarine Thinner |
|---|---|
| Thinner | Epoxy thinner |
| Drying time & | Temperature | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 5hrs | 1hr | 30mins |
| Drying time & recoat interval | Touch Dry | Semi-hard dry | 36hrs | 16hrs | 8hrs |
| Min. interval | Minimum recoat interval | 36hrs | 16hrs | 8hrs | |
| Max. interval | Maximum recoat interval |
| Typical Substrate | Galvanized steel and light metal etc. |
|---|---|
| Suitable for undercoating | Galvanized steel, light metals and others |
| Typical topcoat | Epomarine EX 500, or according to the coating systems of Cosco Kansai. |
| Suitable for overcoating | Epoxy Paint EX 500 or refer to the company's coating system. |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2025/1 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
