EPOMARINE FW 100 Epoxy FW 100 is an epoxy coating. Used as a combined primer/finish coating for fresh-water and potable-water tanks. A high-build pure epoxy coating. Parameters on this page: volume solids 66 ± 2%, dry film thickness 75–200 µm/coat, theoretical spreading rate 0.284 kg/m²/125 µm. Comparable products from the same brand: EPOFEND AR 80 Extra-strength Abrasion-resistant Epoxy High-build, EPOFEND AR Abrasion-resistant Epoxy, EPOFEND MT-30 Special Epoxy MT-30.
Source: KANSAI original technical data sheet (TDS) "EPOMARINE FW 100 Epoxy FW 100"; spreading rate and other values are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 66 ± 2% |
|---|---|
| Dry Film Thickness | 75–200 µm per coat |
| Theoretical Spreading Rate | 0.284 kg/m²/125 µm |
| VOC | 350 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 20 °C |
| Thinner | Epoxy Thinner #20 |
| Mixing Ratio | Base/Hardener=7/1(by weight) |
| EPOMARINE FW 100 | Epoxy FW 100 |
|---|
A hi-build pure epoxy coating
As a protective primer-finish coat can be used in freshwater tanks and potable water tanks.
Complies with GB 5369-2008, GB/T 17219
Highly suitable recommended for drinking water tanks
| Color | Grey, White and Oxide Red |
|---|---|
| Colour | Grey, white and iron red |
| Volume Solids | 66±2% |
| VOC | 350g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 350 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 20°C |
| Flash Point | Above 20 °C |
| Film thickness | Dry 75-200 microns/coat Wet : 114-303microns/coat |
| Applied film thickness | DFT: 75–200 µm per coat; WFT: 114–303 µm per coat |
| Theoretical Coverage | 0.284Kg/m2/125 microns |
| Theoretical spreading rate | 0.284 kg/m²/125 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=7/1(by weight) |
| Mixing ratio | Base : curing agent = 7:1 (by mass) |
| Pot life | 5°C | 20°C | 30°C |
| Pot life | 16hrs | 8hrs | 4hrs |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥15Mpa |
| Thinning ratio | 0–5% by volume |
Brush/Roller; Thinning ratio 5–10% by volume
| Thinner | Epomarine Thinner #20 |
|---|---|
| Thinner | Epoxy Thinner #20 |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 5hrs | 3hrs | 2hrs | 1hr |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 48hrs | 36hrs | 16hrs | 12hrs |
| Before flooding | Dry to immersion | 14days | 10days | 7days | 5days | |
| Min. interval | Minimum recoat interval | 48hrs | 36hrs | 24hrs | 16hrs | |
| Max. interval | Maximum recoat interval | 7days | ||||
| Applied Substrate | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | EPOMARINE FW-100 |
| Suitable for overcoating | Epoxy FW-100 |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2022/1 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
