EPOMARINE CONCRETE SEAL PRIMER epoxy concrete sealer primer is an epoxy coating used as a primer. Seals clean concrete or cement surfaces before topcoating. A two-component low-viscosity epoxy varnish. Excellent penetration and excellent adherence with concrete. Parameters on this page: volume solids 48 ± 2%, dry film thickness 15-20 µm per coat, theoretical spreading rate 0.040 kg/m²/20 µm. Comparable products from the same brand: EPOFEND ZP-30 epoxy zinc phosphate primer ZP-30, EPOFEND ZP-50 epoxy zinc phosphate coating ZP-50, EPOMARINE GX epoxy coating GX.
Data source: KANSAI original Technical Data Sheet (TDS), "EPOMARINE CONCRETE SEAL PRIMER Epoxy Concrete Sealer"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 48 ± 2% |
|---|---|
| Dry Film Thickness | 15–20 µm/coat |
| Theoretical Spreading Rate | 0.040 kg/m²/20 µm |
| VOC | 470 g/L |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 15 °C |
| Thinner | Epoxy thinner |
| Mixing Ratio | Base/Hardener=10.8/4.2 (by weight) |
| EPOMARINE CONCRETE SEAL PRIMER | Epoxy Concrete Sealer |
|---|
A two pack, low viscosity epoxy varnish .
For saturation of well cleaned concrete or cement surfaces before application of finish.
Complies with JT/T821-2011
Excellent penetration properties
| Color | Clear |
|---|---|
| Colour | Clear |
| Volume Solids | 48±2% |
| Flash Point | Greater than 15°C |
| Flash Point | Above 15 °C |
| VOC | 470g/L |
| Volatile organic compound content | 470 g/L |
| Film thickness | Dry: 15-20microns/coat Wet : 31-42microns/coat |
| Applied film thickness | Dry film: 15–20 µm/coat. Wet film: 31–42 µm/coat. |
| Theoretical Coverage | 0.040Kg/m2/20 microns |
| Theoretical spreading rate | 0.040 kg/m²/20 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=10.8/4.2 (by weight) |
| Mixing ratio | Base/Hardener = 10.8/4.2 (by weight) |
| Pot life | 5°C | 20°C | 30°C |
| Pot life | 12hrs | 8hrs | 6hrs |
| Application Methods | Airless spray, air spray brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush, roller. Airless spray |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–3.5% by volume |
Brush/Roller; Thinning ratio 0–3.5% by volume
| Thinner | Epomarine Thinner |
|---|---|
| Thinner | Epoxy thinner |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 3hrs | 2hrs | 1.5hr | 1hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 24hrs | 16hrs | 8hrs | 6hrs |
| Min. interval | Minimum recoat interval | 24hrs | 16hrs | 12hrs | ||
| Max. interval | Maximum recoat interval | -- | ||||
| Applied substrate | Concrete, cement |
|---|---|
| Suitable substrates | Concrete, cement |
| Typical topcoat | Epoxy paint , according to the coating system of Cosco Kansai |
| Suitable for overcoating | Epoxy paints; refer to our coating system for details. |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2021/03 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
