EPOMARINE AE-10 TOPCOAT Oil-Resistant Antistatic Topcoat is a topcoat. Used as a long-term antistatic anticorrosive coating on the internal walls of steel storage tanks carrying petroleum products. It is a two-component amine adduct-cured epoxy coating with antistatic material added. Parameters on this page: dry film thickness 40-60 µm/coat, theoretical spreading rate 0.165 kg/m²/60 µm, number of components: two-component. Comparable models from the same brand: AMEINCOAT INT, AMEINCOAT RC TOPCOAT, FLON FINISH CT-50.
Parameter source: KANSAI original technical data sheet (TDS) for EPOMARINE AE-10 TOPCOAT Oil-Resistant Antistatic Topcoat; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | 40–60 µm per coat |
| Theoretical Spreading Rate | 0.165 kg/m²/60 µm |
| VOC | 460 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 24 °C |
| Thinner | Epoxy Thinner #20 |
| Mixing Ratio | Base/Hardener=5.5/1(by weight) |
| EPOMARINE AE-10 TOPCOAT | Oil-Resistant Static-Dissipative Topcoat |
|---|
A two pack amine adducts cured epoxy paint with conducting electrostatic materials.
As long-term conducting electrostatic anti-corrosive coating on steel tank of interior surface for
Excellent corrosive resistance
| Colour; Volume Solids | White |
|---|---|
| VOC | 460g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 460 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 24°C |
| Flash Point | Above 24 °C |
| Film thickness | Dry 40-60 microns/coat Wet : 83-123microns/coat |
| Applied film thickness | Dry film: 40-60 µm/coat; wet film: 83-123 µm/coat |
| Theoretical Coverage | 0.165Kg/m2/60 microns |
| Theoretical spreading rate | 0.165 kg/m²/60 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=5.5/1(by weight) |
| Mixing ratio | Base/curing agent = 5.5/1 (by weight) |
| Pot life | 10°C | 20°C | 30°C |
| Pot life | 12hrs | 8hrs | 6hrs |
| Application Methods | Airless spray, air spray and roller |
|---|---|
| Application Methods | Airless spray, air spray, roller |
| Nozzle tip | Nozzle size | 0.17mm-0.21mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–5% by volume |
Roller
Thinning ratio 5–10% by volume
| Thinner | Epomarine Thinner #20 |
|---|---|
| Thinner | Epoxy Thinner #20 |
| Drying time & | Temperature | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 6hrs | 4hrs | 2hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 30hrs | 24hrs | 16hrs |
| Min. interval | Minimum recoat interval | 36hrs | 16hrs | 12hrs | |
| Max. interval | Maximum recoat interval | 7days | |||
| Applied substrate | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Preceding coat | EPOMARINE AE-10 PRIMER |
| Suitable for undercoating | Oil-resistant antistatic coating primer |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
