EPOFEND ZP-50 epoxy zinc phosphate coating ZP-50 is an epoxy coating used as a primer. For corrosive environments of new construction and maintenance: for new steel structures in moderate industrial corrosive environments, as a primer. A low-VOC, high-solids, two-component high-build epoxy zinc phosphate coating. Parameters on this page: volume solids 78 ± 2%, dry film thickness 100-250 µm per coat, theoretical spreading rate 0.310 kg/m²/150 µm. Comparable products from the same brand: EPOFEND ZP-30 epoxy zinc phosphate primer ZP-30, EPOMARINE CONCRETE SEAL PRIMER epoxy concrete sealer primer, EPOMARINE GX epoxy coating GX.
Parameter source: KANSAI original Technical Data Sheet (TDS) 'EPOFEND ZP-50 Epoxy Zinc Phosphate Paint ZP-50'; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 78 ± 2% |
|---|---|
| Dry Film Thickness | 100–250 µm/coat |
| Theoretical Spreading Rate | 0.310 kg/m²/150 µm |
| VOC | 210 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 30 °C |
| Thinner | Epoxy Thinner #20 |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| EPOFEND ZP-50 | Epoxy Zinc Phosphate Paint ZP-50 |
|---|
A low VOC, high solids, two pack high build epoxy coating with zinc phosphate
As a primer or intermediate coat can be used in steel structure at industrial moderately
Complies with JT/T 722-2008, JT/T 733-2008
Low VOC, high volume solids
| Color | Grey Oxide Red and oxide yellow |
|---|---|
| Colour | Grey, iron red and iron yellow |
| Volume Solids | 78±2 % |
| VOC | 210g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 210 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 30°C |
| Flash Point | Above 30 °C |
| Film thickness | Dry 100-250 microns/coat Wet : 128-320microns/coat |
| Applied film thickness | DFT: 100–250 µm/coat WFT: 128–320 µm/coat |
| Theoretical Coverage | 0.310Kg/m2/150 microns |
| Theoretical spreading rate | 0.310 kg/m²/150 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40 °C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| Mixing ratio | Base : curing agent = 9:1 (by mass) |
| Pot life | 5°C | 20°C | 30°C |
| Pot life | 8hrs | 6hrs | 3hrs |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush and roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥15Mpa |
| Thinning ratio | 0–5% by volume |
Brush/Roller; Thinning ratio 5–10% by volume
| Thinner | Epomarine Thinner #20 |
|---|---|
| Thinner | Epoxy Thinner #20 |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 5hrs | 4hrs | 3hrs | 2hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 48hrs | 24hrs | 16hrs | 12hrs |
| Min. interval | Minimum recoat interval | 48hrs | 36hrs | 24hrs | 16hrs | |
| Max. interval | Maximum recoat interval | 7days | ||||
| Typical topcoat | EPOTECT EX, EX-500 or according to the coating system of Cosco Kansai. |
|---|---|
| Suitable for overcoating | EPOTECT EX, EX-500 or refer to our coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be
kept tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this datasheet is the most comprehensive and correct data currently available to us. As the conditions of product use are beyond our control, this information carries no warranty, and liability to the buyer is limited solely to the selection of the product. Due to continuous development of our products and production processes, the content of this datasheet is subject to change at any time, and all information herein is subject to our confirmation.
Before use, confirm that the datasheet in hand is the latest version.
| Issued Date | 2016/04 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
