EPOFEND ZP-30 epoxy zinc phosphate primer ZP-30 is an epoxy coating used as a primer. Maintenance primer. For use on steel structure: for new construction or as a maintenance primer on steel surfaces. Phosphate: a polyamide-cured modified epoxy anti-corrosive coating using zinc phosphate as the anti-corrosive pigment. Excellent anti-corrosive performance, excellent surface-tolerant properties and zinc phosphate as anti-corrosive pigment. Parameters on this page: volume solids 55 ± 2%, theoretical spreading rate 0.130 kg/m²/50 µm, number of components: two-component.
Parameter source: KANSAI manufacturer's Technical Data Sheet (TDS) "EPOFEND ZP-30 Epoxy Zinc Phosphate Primer ZP-30"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 55 ± 2% |
|---|---|
| Dry Film Thickness | 50–75 µm per coat |
| Theoretical Spreading Rate | 0.130 kg/m² /50µm |
| VOC | 400 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | 25°C |
| Thinner | Epoxy Thinner #20 |
| Mixing Ratio | Base/Hardener=5/1(by weight) |
| EPOFEND ZP-30 | Epoxy Zinc Phosphate Primer ZP-30 |
|---|
A polyamide cured modified epoxy anti-corrosive paint pigmented with zinc
As a primer can be used in new construction situations and as industrial
Complies with TB/T 2610-2001
Good anti-corrosive performance
| Color | Grey, oxide red |
|---|---|
| Colour | Grey, Iron Red |
| Gloss | Matt |
| Gloss | Matt |
| Volume Solids | 55±2% |
| VOC | 400g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 400 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | 25°C |
| Film thickness | Dry 50-75 microns/coat Wet : 91-136microns/coat |
| Applied film thickness | Dry film: 50–75 µm per coat; wet film: 91–136 µm per coat |
| Theoretical Coverage | 0.130kg/m²/50 microns |
| Theoretical Spreading Rate | 0.130 kg/m²/50µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=5/1(by weight) |
| Mixing ratio | Base/curing agent = 5/1 (by weight) |
| Pot Life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 16hrs | 12hrs | 8hrs | 6hrs |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.38mm-0.48mm | |
| Nozzle pressure | Output pressure | ≥10Mpa | |
| Thinning ratio | 10-20% by weigh(t | by weight) |
Brush/Roller; Thinning ratio 0–10% by weight
| Thinner | Epomarine Thinner#20 |
|---|---|
| Thinner | Epoxy Thinner #20 |
| Drying time & Overcoating interval | Drying time & Surface dry | Drying time & touch dry | 10°C 3hrs | 20°C 2hrs | 30°C 2hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 16hrs | 12hrs | 8hrs |
| Min. interval | Minimum recoat interval | 24hrs | 16hrs | 12hrs | |
| Max. interval | Maximum recoat interval | 7days | |||
| Applied Substrate | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | Universal EP-60, Retan 6000 or according to the coating system of Cosco Kansai. |
| Suitable for overcoating | Epoxy paint EP-60, Polyurethane Topcoat 6000, or refer to the company's coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at
the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2023/07 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
