EPOFEND ZINC 60 epoxy zinc-rich primer 60 is a zinc-rich primer of the epoxy system. For steel structures in severe corrosive environments in industrial settings. Hardener and zinc powder: a high-build epoxy zinc-rich anti-corrosive coating consisting of epoxy resin, polyamide and zinc dust. Parameters on this page: volume solids 69% ± 2%, dry film thickness 30-80 µm per coat, theoretical spreading rate 13.8 m²/L. Comparable products from the same brand: EPOTAINER ZINC 60 epoxy zinc-rich primer 60, SC ZINC PRIMER epoxy zinc-rich shop primer, SD NON ZINC PRIMER epoxy zinc-free shop primer.
Parameter source: KANSAI manufacturer's Technical Data Sheet (TDS) "EPOFEND ZINC 60 Epoxy Zinc-rich Primer 60"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 69% ± 2% |
|---|---|
| Dry Film Thickness | 30–80 µm per coat |
| Theoretical Spreading Rate | 13.8 m²/L /50 µm |
| VOC | 254 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 18 °C |
| Thinner | Epoxy thinner |
| Mixing Ratio | Base/Hardener=19/1(by weight) |
| EPOFEND ZINC 60 | Epoxy Zinc-Rich Primer 60 |
|---|
A high-build organic zinc rich anti-corrosive coating based on epoxy resin, polyamide
For steel structure at industrial severe corrosive environment
Complies with ISO 12944-5, SSPC PAINT 20, HG/T 3668-2009
Excellent rust preventive property
| Color | Grey |
|---|---|
| Colour | Grey |
| Gloss | Matt |
| Gloss | Matt |
| Volume solids | 69%±2% |
| VOC | 254g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 254 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 18°C |
| Flash Point | Above 18 °C |
| Film thickness | Dry:30-80 microns/coat Wet : 45-115microns/coat |
| Applied film thickness | Dry film: 30–80 µm/coat Wet film: 45–115 µm/coat |
| Theoretical Coverage | 13.8m2/L/50 microns |
| Theoretical Spreading Rate | 13.8 m²/L/50 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=19/1(by weight) |
| Mixing ratio | Base : curing agent = 19:1 (by weight) |
| Pot Life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 16hrs | 12hrs | 8hrs | 6hrs |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥15Mpa |
| Thinning ratio | 0–10% by weight |
Brush/Roller; Thinning ratio 0–10% by weight
| Thinner | Epomarine Thinner |
|---|---|
| Thinner | Epoxy thinner |
| Drying time & | Temperature | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 30mins | 20mins | 10mins |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 6hrs | 3hrs | 1hr |
| Min. interval | Minimum recoat interval | 5hrs | 2hrs | 1hr | |
| Max. interval | Maximum recoat interval |
| Applied Substrates | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | Universal EP-60, Epomarine EX 500 or according to the coating system of Cosco |
| Suitable for overcoating | Kansai. |
Epoxy coating EP-60, epoxy coating EX 500, or refer to the company's coating system
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at
the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2020/05 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
