EPOFEND MT-30 Special Epoxy Paint MT-30 is an epoxy coating. Environments of maintenance. In maintenance systems, used on rusty substrates prepared by hand tool or surfaces with other low surface preparation requirements. A low-VOC, high-solids, two-component surface-tolerant epoxy coating. Parameters on this page: volume solids 80 ± 2%; dry film thickness 75–200 µm per coat; theoretical spreading rate 0.185 kg/m²/100 µm. Comparable products from the same brand: EPOFEND AR 80 Strong Abrasion-resistant Epoxy High-build Paint, EPOFEND AR Abrasion-resistant Epoxy Paint, EPOFEND ZP-30 Epoxy Zinc Phosphate Primer ZP-30.
Source: KANSAI original technical data sheet (TDS) 'EPOFEND MT-30 Special Epoxy Paint MT-30'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 80 ± 2% |
|---|---|
| Dry Film Thickness | 75–200 µm per coat |
| Theoretical Spreading Rate | 0.185 kg/m²/100 µm |
| VOC | 267 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 24 °C |
| Thinner | Epomarine Thinner |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| EPOFEND MT-30 | Special Epoxy Paint MT-30 |
|---|
A low VOC, high solids, two pack surface tolerant epoxy maintenance coating.
For a variety surface including hand prepared rusty steel and other low requirement surface at
Low VOC, High volume solids
| Color | Dark Grey and Oxide Red (Do not recommend light color) |
|---|---|
| Colour | Dark grey and iron red (light colours not recommended) |
| Volume Solids | 80±2 % |
| VOC | 267g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 267 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 24°C |
| Flash Point | Above 24 °C |
| Film thickness | Dry 75-200microns/coat Wet :94-250microns/coat |
| Applied film thickness | Dry film: 75–200 µm per coat; wet film: 94–250 µm per coat |
| Theoretical Coverage | 0.185Kg/m2/100microns |
| Theoretical spreading rate | 0.185 kg/m²/100 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40 °C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| Mixing ratio | Base : curing agent = 9:1 (by mass) |
| Pot life | 5°C | 10°C | 20°C | 30°C |
| Application Methods | 10hrs | 8hrs | 4hrs | 2hrs |
| Application Methods | Airless spray, air spray, brush and roller |
|---|
Airless spray, air spray, brush, roller
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥15Mpa |
| Thinning ratio | 0–5% by volume |
Brush/Roller — brush, roller
| Thinner | Thinning ratio 5–10% by volume |
|---|---|
| Thinner | Epomarine Thinner |
Epoxy thinner
| Drying time & Overcoating interval | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Drying time & recoat interval | Surface dry | Touch dry | 4hrs | 2hrs | 1hrs | |
| Touch dry | Semi-hard dry | 48hrs | 16hrs | 12hrs | ||
| Min. interval | Minimum recoat interval | 48hrs | 24hrs | 16hrs | 12hrs | |
| Max. interval | Maximum recoat interval | 7days | ||||
| Typical undercoat; suitable undercoat | Bare steel, various of existing paints etc.. |
|---|---|
| Typical topcoat | Bare steel, most old coatings, etc. |
| Suitable for overcoating | PU Finish, or according to the coating system of Cosco Kansai. |
Polyurethane topcoat, or refer to the company's coating system
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.
Please check this date sheet is current prior to using the product.
| Issued Date | 2015/09 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
