EPOFEND GLASS 30 Epoxy Glass Flake 30 is a glass flake paint, an epoxy coating system. Can also be used in coating systems for the inner walls of crude oil storage tanks. A high-build two-component epoxy coating reinforced with glass flake. Excellent acid, alkali, oil and seawater resistance. Prevents penetration of chemicals and water vapour. Excellent mechanical strength and excellent adhesion. Parameters on this page: volume solids 80 ± 2%, dry film thickness 125–500 µm/coat, theoretical spreading rate 4.0 m²/L.
Data source: KANSAI original Technical Data Sheet (TDS), "EPOFEND GLASS 30 Epoxy Glass Flake 30"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 80 ± 2% |
|---|---|
| Dry Film Thickness | 125–500 µm/coat |
| Theoretical Spreading Rate | 4.0 m²/L/200 µm |
| VOC | 196 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 30 °C |
| Thinner | Epoxy Thinner 20# |
| Mixing Ratio | Base/Hardener=5.2/1(by weight) |
| EPOFEND GLASS 30 | Epoxy Glass Flake 30 |
|---|
A high build, two packs epoxy coating reinforced with Glass flakes.
For surface subject to abrasion and highly corrosive environment of splash zones, jetty
Complies with JT/T 722-2008, GB/T 28699-2012, SY/T 0457-2010
Excellent durability against acid, alkali, oils, sea water
| Color | Grey |
|---|---|
| Colour, Volume Solids | Grey |
| Volume Solids | 80±2% |
| VOC | 196g/L,accord with EU Dircrtive2004/42/EC,subcategory j. |
| Volatile organic compound content | 196 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 30°C |
| Flash Point | Above 30 °C |
| Film thickness | Dry : 125-500 µm/coat Wet : 155-625µm/coat |
| Applied film thickness | Dry film: 125–500 µm/coat. Wet film: 155–625 µm/coat |
| Theoretical Coverage | 4.0m2/Ltr/200 microns |
| Theoretical Spreading Rate | 4.0 m²/L/200 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=5.2/1(by weight) |
| Mixing ratio | Base/Hardener = 5.2/1 (by weight) |
| Pot Life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 4hrs | 3.5hrs | 3hrs | 2.5hrs |
| Application Methods | Airless spray, air spray brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush and roller |
| Nozzle tip | Nozzle size | 0.027-0.033(in) |
| Nozzle pressure | Output pressure | ≥15MPa |
| Thinning ratio | 5–20% by volume |
Brush/Roller. Thinning ratio 5–20% by volume
| Thinner | Epomarine Thinner 20# |
|---|---|
| Thinner | Epoxy Thinner 20# |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 10hrs | 6hr | 4hr | 3hr |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 48hrs | 36hrs | 24hrs | 18hrs |
| Min. interval | Minimum recoat interval | 36hrs | 24hrs | 18hrs | ||
| Max. interval | Maximum recoat interval | 9days | 7days | |||
| Applied Substrate | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | PU Finish HS-50, PU Finish 2010 or according to the coating system of COSCO |
| Suitable for overcoating | Kansai. |
Polyurethane topcoat HS-50, polyurethane topcoat 2010 or refer to COSCO Kansai coating system
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the
time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development. Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2018/1 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
