EPOFEND AR 80 Extra Heavy-duty Abrasion-resistant Epoxy High-build Paint is an epoxy coating. For new construction and maintenance. Used as a primer on new steel structures in bridges and industrial corrosive environments. It is a low-VOC, high-solids, two-component modified abrasion-resistant epoxy coating. Parameters on this page: volume solids 74 ± 2%, dry film thickness 100–200 µm/coat, theoretical spreading rate 0.379 kg/m²/175 µm. Comparable products of the same brand and category: EPOFEND AR Abrasion-resistant Epoxy Paint, EPOFEND MT-30 Special Epoxy Paint MT-30, EPOFEND ZP-30 Epoxy Zinc Phosphate Primer ZP-30.
Parameter source: KANSAI manufacturer's Technical Data Sheet (TDS) "EPOFEND AR 80 Extra Heavy-duty Abrasion-resistant Epoxy High-build Paint"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 74 ± 2% |
|---|---|
| Dry Film Thickness | 100–200 µm per coat |
| Theoretical Spreading Rate | 0.379 kg/m²/175 µm |
| VOC | 224 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | 30°C |
| Thinner | Epoxy Thinner #20 |
| Mixing Ratio | Base/Hardener=9.3/1(by weight) |
| EPOFEND AR 80 | Extra Heavy-duty Abrasion-resistant Epoxy High-build Paint |
|---|
A low VOC, high solids, two pack modified high build abrasion resistance epoxy coating.
As a primer can be used in steel structure at industrial and bridge corrosive environments of
Complies with JT/T 722-2023
Low VOC, High volume solids
| Color | Grey and Oxide Red |
|---|---|
| Colour | Grey and iron red |
| Gloss | Flat |
| Gloss | Matt |
| Volume Solids | 74±2% |
| VOC | 224g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 224 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | 30°C |
| Film thickness | Dry: 100-200 microns/coat Wet : 135-270microns/coat |
| Applied film thickness | Dry film: 100–200 µm/coat; wet film: 135–270 µm/coat |
| Theoretical Coverage | 0.379Kg/m2/175 microns |
| Theoretical spreading rate | 0.379 kg/m²/175 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=9.3/1(by weight) |
| Mixing ratio | Base/Hardener = 9.3/1 (by weight) |
| Pot life | 5°C | 10°C | 20°C | 30°C |
| Pot life | 8hrs | 6hrs | 4hrs | 2hrs |
| Application Methods | Airless spray, air spray and roller |
|---|---|
| Application Methods | Airless spray, air spray, roller |
| Nozzle tip | Nozzle size | 317-521 |
| Nozzle pressure | Output pressure | ≥15Mpa |
| Thinning ratio | 0–15% by volume |
Roller
Thinning ratio: 0–15% by volume.
| Thinner | Epomarine Thinner #20 |
|---|---|
| Thinner | Epoxy Thinner #20 |
| Drying time & Overcoating interval | Drying time & Surface dry | Drying time & touch dry | 5°C 3hrs | 10°C 3hrs | 20°C 2hrs | 30°C 1.5hr |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 48hrs | 24hrs | 16hrs | 12hrs |
| Min. interval | Minimum recoat interval | 48hrs | 36hrs | 24hrs | 16hrs | |
| Max. interval | Maximum recoat interval | 7days | ||||
| Typical undercoat | Bare steel, SD ZINC 500 etc. |
|---|---|
| Suitable for undercoating | Bare steel, epoxy zinc-rich coating 500, and similar |
| Typical topcoat | RETAN 6000, FLON FINISH or according to the coating system of Cosco Kansai. |
| Suitable for overcoating | Polyurethane Topcoat 6000, fluorocarbon topcoat, or refer to our coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.
Please check this date sheet is current prior to using the product.
| Issued Date | 2025/06 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
