China-based coatings exporter — industrial & marine protective coatings from China's production bases

AMEINCOAT RC PRIMER Container Primer

Quick Specs

AMEINCOAT RC PRIMER container primer belongs to primers. Parameters on this page: theoretical spreading rate 0.030 kg/m². Comparable models of the same brand: ALKFEND PRIMER 30 alkyd primer 30, AMEINCOAT PRIMER container primer, EPOMARINE AE-10 PRIMER oil-resistant anti-static anticorrosive primer.

Source of parameters: KANSAI manufacturer's Technical Data Sheet (TDS) "AMEINCOAT RC PRIMER Container Primer"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.

This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.

Request a Quote

Volume Solids	62%
Dry Film Thickness	—
Theoretical Spreading Rate	0.030 Kg/m2
VOC	<150 g/L
Density / Specific Gravity	1.35-1.40
Number of Components	Two-component
Mixing Ratio	Base/Hardener = 14/1 (by wt.)
Pot Life	4hrs
Shelf life	Base:12months Hardener:12months She…

Browse Similar Models by CategoryThis model belongs to: Primer

Coating Position

Primer Intermediate Coat Topcoat Auxiliary

Functional Category

Zinc-rich Primer Glass Flake Antifouling Heat-resistant Fire Protection Potable Water Tank Cold galvanizing Thermal Insulation

Resin Type

Epoxy Water-borne Polyurethane, fluorocarbon Acrylic Silicone Alkyd Inorganic Zinc Silicate Fluorocarbon Chlorinated Rubber Phenolic Vinyl Ester

AMENICOAT RC PRIMER Product Description	Two-component waterborne paint based on waterborne epoxy resin, modified amine and special anti-rust pigment.

Recommended Use

As an intermediate coating can be used for reefer container.

Physical Properties

Color	Grey
Mixing ratio	Base/Hardener = 14/1 (by wt.)
Theoretical Volume by Weight,%	62
Specific gravity	1.35-1.40
VOC	<150 g/L
Film thickness	Dry:50 microns/coat Wet :100 microns/coat
Theoretical Coverage	0.030 Kg/m2/10 microns

Storage

Store in dry, cool conditions, and away from sources of heat & ignition. Containers must be kept tightly closed.

Storage Temperature	5°C-35°C
Shelf life	Base:12months Hardener:12months Shelf life:Subject to re-inspection thereafter.

Application

Application Temperature	15°C-35°C
Pot life	4hrs
Application Methods	Airless spray, air spray , brush , roller
Thinner	Water
Drying & Oven schedule	30min@55°C

Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.

How many components does AMEINCOAT RC PRIMER have?: AMEINCOAT RC PRIMER is a two-component product; mix it according to the mixing ratio in the Coating Data table on this page before use.
What is the mixing ratio of AMEINCOAT RC PRIMER?: The mixing ratio of AMEINCOAT RC PRIMER is Base/Hardener = 14/1 (by wt.).
What is the theoretical spreading rate of AMEINCOAT RC PRIMER?: The theoretical spreading rate of AMEINCOAT RC PRIMER is 0.030 Kg/m2; actual consumption depends on substrate roughness, application losses and colour hiding power.
What is the volume solids of AMEINCOAT RC PRIMER?: The volume solids of AMEINCOAT RC PRIMER is 62%.
What is the VOC of AMEINCOAT RC PRIMER?: The VOC of AMEINCOAT RC PRIMER is <150 g/L.
Where can I buy AMEINCOAT RC PRIMER?: RichTech Industrial Technology (Shanghai) Co., Ltd. distributes industrial and marine coatings; KANSAI KANSAI is one of our regularly stocked brands, with coating selection, system design and quantity calculation support. Address: 10F, Changhui Building, 799 Yinxiang Road, Jiading District, Shanghai, China. Tel: +86 21 5056 8299 (9:00–21:00).

For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.