ALKFEND PRIMER 30 alkyd primer 30 is an alkyd coating used as a primer. For steel structures in non-immersed areas. An anti-corrosive primer based on long-oil alkyd resin and anti-corrosive pigments. Good anti-corrosive performance, compatibility with alkyd finish systems and good workability. Parameters on this page: volume solids 62 ± 2%, dry film thickness 30-80 µm per coat, theoretical spreading rate 15.5 m²/L. Comparable products from the same brand: SD MARINE BUILD PRIMER high-build alkyd primer, SD MARINE PRIMER alkyd primer, AMEINCOAT ZINC PRIMER container zinc-rich primer.
Parameter source: KANSAI original technical data sheet (TDS) ALKFEND PRIMER 30 Alkyd Primer 30; values such as spreading rate are converted from TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 62 ± 2% |
|---|---|
| Dry Film Thickness | 30–80 µm per coat |
| Theoretical Spreading Rate | 15.5 m²/L /40 µm |
| VOC | 304 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | One-component |
| Flash Point | Above 36 °C |
| Thinner | Dedicated thinner |
| Mixing Ratio | Single-component coating |
| ALKFEND PRIMER 30 | Alkyd Primer 30 |
|---|
A rust preventive primer based on long oil alkyd resin and anti-rust pigments.
For steel structure in non immersion areas.
Complies with GB/T 25251-2010
Good corrosion resistance
| Color | Oxide Red, Grey |
|---|---|
| Colour | Iron red, grey |
| Volume Solids | 62±2% |
| Flash Point | Greater than 36°C |
| Flash Point | Above 36 °C |
| VOC | 304g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 304 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Film thickness | Dry : 30-80microns/coat Wet : 50-130microns/coat |
| Applied film thickness | Dry film: 30–80 µm/coat Wet film: 50–130 µm/coat |
| Theoretical Coverage | 15.5 m2/L/40microns |
| Theoretical Spreading Rate | 15.5 m²/L/40 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | -5°C-40°C |
|---|---|
| Mixing | Mix thoroughly with power agitator |
| Mixing | Stir thoroughly with a power tool |
| Mixing Ratio | One component coating |
| Mixing ratio | Single-component coating |
| Application Methods | Airless spray, air spray, brush and roller |
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–10% by weight |
Brush/Roller; Thinning ratio 0–5% by weight
| Thinner | Paint Thinner |
|---|---|
| Thinner | Dedicated thinner |
| Drying time & | Temperature | -5°C | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 120mins | 60mins | 30mins | 15mins |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 48hrs | 30hrs | 24hrs | 16hrs |
| Min. interval | Minimum recoat interval | 48hrs | 24hrs | 10hrs | 6hrs | |
| Max. interval | Maximum recoat interval | -- | ||||
| Applied substrate | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | ALKFEND FINISH or according to the coating system of Cosco Kansai. |
| Suitable for overcoating | Alkyd topcoat, or refer to our coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.
Please check this date sheet is current prior to using the product.
| Issued Date | 2025/09 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
