Red Lead Oil-based Anticorrosive Paint Y53-31 is a primer. It is intended as an anticorrosive paint for steel plates above the waterline of ships, steel machinery and equipment, and onshore steel structures. It is an oil-based red lead anticorrosive paint formulated from red lead powder, refined drying vegetable oil, driers, additives and solvents. It can be used in coating systems with conventional products such as oil-based, phenolic and alkyd paints. Parameters on this page: volume solids 59 ± 3%, dry film thickness 40 µm, theoretical spreading rate 137 g/m².
Parameter source: KAILIN original technical data sheet (TDS) "Red Lead Oil-based Anticorrosive Paint Y53-31"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 59 ± 3% |
|---|---|
| Dry Film Thickness | 40µm |
| Theoretical Spreading Rate | 137 g/m² |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | 40°C |
| Thinner | Thinner 104 |
| Colour / Appearance | Orange-red |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
| Composition | Oil-based red lead anticorrosive paint formulated from red lead powder, refined drying vegetable oil, driers, additives and solvents. |
|---|
Compatible with traditional products such as oil-based, phenolic and alkyd
| Use | Intended as an anticorrosive paint for steel plates above the waterline of ships, steel machinery and equipment, and onshore steel structures. |
|---|---|
| Appearance | Orange-red. |
| Volume Solids | 59±3% (determined in accordance with GB/T9272 eqv ISO3233:1998) |
|---|---|
| Dry Film Thickness | 40µm |
| Wet Film Thickness | 68µm |
| Theoretical quantity | 137g/m² |
| Flash Point | 40°C |
| Drying Time | 25 °C touch dry ≤ 8 h, hard dry ≤24 h |
| Recoat interval | |||
| Temperature | 5°C | 20°C | 30°C |
| Minimum | 48h | 24h | 20h |
| Maximum | 3 months | ||
| Recommended number of coats | 2 coats, dry film thickness above 80 µm |
|---|---|
| Subsequent coat | Various phenolic, ester gum and alkyd topcoats |
Mill-scale-free steel: grind with abrasive discs to St 3
Shop-primed steel: re-prepare damaged and rusted film areas, abrading to St 3
Welded, flame-cut or heat-corrected areas: grind to St 3
Substrates with existing coating (same type): remove loose, failed old coating and rust; prepare with pneumatic or power grinding tools to St 3
| Thinner | Thinner 104 |
|---|---|
| Thinning quantity | 0–5% (by paint weight) |
| Nozzle tip size | 0.4-0.5mm |
| Spray output pressure | 12–15 MPa (approx. 120–150 kg/cm²) |
| Air Spray | |
| Thinner | Thinner 104 |
| Thinning quantity | 0–10% (by paint weight) |
| Nozzle tip size | 2.0-3.0mm |
| Air pressure | 0.3–0.4 MPa (approx. 3–4 kg/cm²) |
| Roller/brush | Thinner 104; thinning quantity 0–3% (by paint weight) |
|---|---|
| Cleaning solvent | Thinner 104 |
| Safety measures | See the Safety Data Sheet (MSDS) of Shanghai Kailin Paint Factory. |
| Packaging | 19 kg in a 10 L drum |
| Shelf Life | 12 months |
The red lead paint film should not be exposed to air for too long, otherwise the film tends to whiten or discolour; apply the matching topcoat as soon as possible.
Red lead paint is not suitable for prolonged immersion and shall not be used on the waterline or hull bottom
As the film contains red lead, it is not suitable for use in enclosed spaces where flame straightening is carried out, to prevent lead poisoning
| Notes | To use this product correctly, read the Application Guide in this data sheet carefully. |
|---|
The above information and data for this product are accumulated from our tests and practical experience
accumulated, and may serve as an application guide. For application carried out under conditions unknown to us, we
we guarantee only the quality of the paint itself and accept no responsibility for other matters. We
We reserve the right to make modifications as the product is improved.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
