KAILIN Thinner is an auxiliary material. If used improperly, the film may develop defects, causing premature failure or even explosion and fire. For correct use of the thinner, read the application guide carefully and observe fire safety precautions.
Source: KAILIN original technical data sheet (TDS) 'KAILIN Thinner'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | — |
| Theoretical Spreading Rate | — |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Thinner | 37 °C Chlorinated Rubber |
Thinner is used to adjust paint viscosity to suit different application conditions. However, if used
improperly, the film may develop defects, causing premature failure or even explosion and fire, etc.
accidents may occur. For correct use of the thinner, read the application guide carefully and observe fire safety precautions.
| Code | Thinner, Name, Flash Point, Use |
|---|---|
| 101101 Chlorinated Rubber Paint Thinner | 37 °C Chlorinated Rubber |
| 102102 Acrylic Paint Thinner | 28 °C, Acrylic Paint |
| 103103 Epoxy / Epoxy Coal-tar Paint Thinner | 27 °C, Epoxy / Epoxy Coal-tar Paint |
| 104104 Alkyd / Phenolic Paint Thinner | 35 °C, Alkyd / Phenolic / Oil-based Paint |
| 105105 Bituminous Paint Thinner | 48 °C, Bituminous Paint |
| 106106 Epoxy Shop Primer Thinner | 2 °C, 702 / 703 Shop Primer |
| 107107 Inorganic Zinc Silicate Paint Thinner | 15°C 704, E06-1 |
| 109109 Aromatic Polyurethane Paint Thinner | 24 °C, 1900 Conductive Paint |
| 110110 Recoatable Polyurethane Paint Thinner | 15 °C, Polyurethane Topcoat |
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
