Coal-tar Bitumen Varnish L01-17 is a topcoat. It can also be used in damp places, on buried steel surfaces, and as a bottom paint for inland wooden boats. Composed of coal-tar pitch and coal-tar solvent. Parameters on this page: volume solids 62 ± 3%; dry film thickness 25 µm; theoretical spreading rate 42 g/m².
Source: KAILIN original technical data sheet (TDS) 'Coal-tar Bitumen Varnish L01-17'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 62 ± 3% |
|---|---|
| Dry Film Thickness | 25µm |
| Theoretical Spreading Rate | 42 g/m² |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | 54°C |
| Colour / Appearance | Black, gloss |
| Drying Time | Touch dry ≤ 2 h; hard dry ≤ 18 h; overcoating interval (25 °C) |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
| Composition | Composed of coal-tar pitch and coal-tar solvent. |
|---|
Suitable for coal bunkers and anchor chains on ships as a repair coating. Can also be used in damp places, on buried steel
surfaces, and as a bottom paint for inland wooden boats.
| Appearance | Black, gloss. |
|---|
| Volume Solids | 62 ± 3% (determined per GB/T 9272, eqv. ISO 3233:1998) |
|---|---|
| Dry Film Thickness | 25µm |
| Wet Film Thickness | 40µm |
| Theoretical quantity | 42g/m² |
| Flash Point | 54°C |
| Drying time (25 °C) | Touch dry ≤ 2 h; hard dry ≤ 18 h; overcoating interval (25 °C) |
| Minimum | 18h |
| Maximum | Unlimited |
| Recommended number of coats | 2 coats, dry film thickness 50 µm (the coal-tar pitch in the L01-17 film tends to bleed and cause discolouration, so other coatings should not be applied over it). |
| Dipping | Thinner 105; thinning 0–5% (by paint weight) |
|---|---|
| Roller/brush | Thinner 105; thinning quantity 0–3% (by paint weight) |
| Cleaning solvent | Thinner 105 |
| Safety measures | See the Safety Data Sheet (MSDS) of Shanghai Kailin Paint Factory. |
| Packaging | 20 L pail, 20 kg |
| Shelf Life | 12 months. |
| Notes | To use this product correctly, read the Application Guide in this data sheet carefully. |
The above information and data for this product are accumulated from our tests and practical experience
accumulated, and may serve as an application guide. For application carried out under conditions unknown to us, we
We guarantee only the quality of the paint itself and accept no responsibility for other matters. We
and reserve the right to make modifications as the product is improved.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
