Acrylic Topcoat in Various Colours B43-31 is an acrylic coating used as a topcoat. Suitable for protection and decoration of various steel structure surfaces, such as ship hulls, ship superstructures, power plants, steel mills, chemical plants, bridges, containers, hydraulic steel gates and dry gas holders. An acrylic topcoat composed of acrylic resin, rutile titanium dioxide, colouring pigments, additives and organic solvents. High application performance, applicable at -20 °C to 50 °C; easy maintenance, with no need to remove or abrade sound old acrylic film when recoating. Parameters on this page: volume solids 39 ± 3%; dry film thickness 40 µm; theoretical spreading rate 123 g/m².
Source: KAILIN original technical data sheet (TDS) 'Acrylic Topcoat in Various Colours B43-31'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 39 ± 3% |
|---|---|
| Dry Film Thickness | 40µm |
| Theoretical Spreading Rate | 123 g/m² |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | 25°C |
| Thinner | Thinner 102 |
| Colour / Appearance | Various colours, gloss or matte |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
| Composition | An acrylic topcoat composed of acrylic resin, rutile titanium dioxide, colouring pigments, additives and organic solvents. |
|---|
High application performance, applicable at -20 °C to 50 °C
Easy maintenance; no need to remove or abrade sound old acrylic film when recoating
Suitable for ship hulls, ship superstructures, power plants, steel mills, chemical plants, bridges, containers,
hydraulic steel gates, dry gas holders and other steel structure surfaces for protection and decoration.
| Appearance | Various colours, gloss or matte |
|---|
| Volume Solids | 39 ± 3% (measured according to GB/T 9272 eqv ISO 3233:1998) |
|---|---|
| Dry Film Thickness | 40µm |
| Wet Film Thickness | 103µm |
| Theoretical quantity | 123g/m² |
| Flash Point | 25°C |
| Drying time (25 °C) | Touch dry ≤ 2 h; hard dry ≤ 24 h |
| Recoat interval | |||
| Temperature | 5°C | 20°C | 30°C |
| Minimum | 48h | 24h | 12h |
| Maximum | Unlimited | ||
| Recommended number of coats | 2 coats, dry film thickness 80 µm. |
|---|
842 Epoxy MIO Anti-rust Paint, 615-1/615-2 Aluminium Chlorinated Rubber Anti-rust Paint, 616 Chlorinated Rubber
Iron Oxide Red High-build Anti-rust Paint.
The substrate temperature must be at least 3 °C above the dew point, and the steel temperature must not exceed 60 °C
| Airless Spray | |
| Thinner | Thinner 102 |
| Thinning quantity | 0–5% (by paint weight) |
| Nozzle tip size | 0.2-0.4mm |
| Spray output pressure | 15–20 MPa (approx. 150–200 kg/cm²) |
| Air Spray | |
| Thinner | Thinner 102 |
| Thinning quantity | 0–10% (by paint weight) |
| Nozzle tip size | 2.0-2.5mm |
| Air pressure | 0.3–0.4 MPa (approx. 3–4 kg/cm²) |
| Roller/brush | Thinner 102, thinning 0–3% (by weight of paint) |
|---|---|
| Cleaning solvent | Thinner 102 |
| Safety measures | See the Safety Data Sheet (MSDS) of Shanghai Kailin Paint Factory. |
| Packaging | 22 kg in a 20 L drum |
| Shelf Life | 12 months |
| Notes | To use this product correctly, read the Application Guide in this data sheet carefully. |
The above information and data for this product are accumulated from our tests and practical experience
accumulated, and may serve as an application guide. For application carried out under conditions unknown to us, we
We guarantee only the quality of the paint itself and accept no responsibility for other matters. We
and reserve the right to make modifications as the product is improved.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
