Silver Heat-Resistant Paint 85 is a heat-resistant paint. Suitable for high-temperature boilers, chemical plant reaction towers and kettles, and various equipment and components requiring heat resistance that cannot be stoved. A heat-resistant paint composed of modified polyester, aluminium powder, heat-resistant extender pigments, additives and organic solvents. Good heat resistance; usable in the 200°C-300°C range. The film resists moisture, oil and attack by common atmospheric corrosive media. Parameters on this page: volume solids 38 ± 3%, DFT 20 µm, theoretical spreading rate 58 g/m².
Parameter source: KAILIN original Technical Data Sheet (TDS) 'Silver Heat-Resistant Paint 85'; spreading rate and other values are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 38 ± 3% |
|---|---|
| Dry Film Thickness | 20µm |
| Theoretical Spreading Rate | 58 g/m² |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | 27°C |
| Thinner | Xylene (thinner generally not required) |
| Colour / Appearance | Silver grey |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
| Composition | Heat-resistant paint composed of modified polyester, aluminium powder, heat-resistant extender pigments, additives and organic solvents. |
|---|
Good heat resistance; usable in the 200°C-300°C range.
The film resists moisture, oil and attack by common atmospheric corrosive media.
| Use | Suitable for high-temperature boilers, chemical plant reaction towers and kettles, and various equipment and components requiring heat resistance that cannot be stoved. |
|---|---|
| Appearance | Silver grey |
| Volume Solids | 38±3% (determined as specified in GB/T9272 eqvISO3233:1998) |
|---|---|
| Dry Film Thickness | 20µm |
| Wet Film Thickness | 53µm |
| Theoretical quantity | 58g/m² |
| Flash Point | 27°C |
| Drying time (25 °C) | Touch dry ≤ 15min, hard dry ≤ 24h, stoving (150°C±2°C) ≤ 2h |
| Recoat interval | ||||
| Temperature | 5°C | 20°C | 30°C | 150°C |
| Minimum | 48h | 24h | 16h | 2h |
| Maximum | Unlimited |
|---|---|
| Recommended number of coats | 2 coats, dry film thickness 40 µm. |
May be applied directly over steel prepared to Sa 2.5
E06-1 inorganic zinc silicate anti-rust paint may also be used as primer to improve anti-rust performance. Generally
1 coat of E06-1 inorganic zinc silicate anti-rust paint (40µm) and 1-2 coats of 85 Silver Heat-Resistant Paint (20-40µm) are recommended.
Mill-scale-free steel: abrasive blast clean to Sa 2.5 or grind with abrasive discs to St 3
Areas damaged by welding, flame cutting or flame straightening: remove welding flux, weld slag and spatter completely, then
blast to Sa2.5 or grind with a flexible grinding disc to St3.
Steel with existing coating: abrasive blast clean to Sa 2.5; or remove all old coating and grind with abrasive discs to St 3
For best results, after applying the first high-temperature coat, heat to the service temperature, and apply the second coat after cooling
The substrate temperature must be at least 3 °C above the dew point, but not more than 60 °C
| Airless Spray | |
| Thinner | Xylene (thinner generally not required) |
| Thinning quantity | 0–5% (by paint weight) |
| Nozzle tip size | 0.4-0.5mm |
| Spray output pressure | 12–15 MPa (approx. 120–150 kg/cm²) |
| Air Spray | |
| Thinner | Xylene |
| Thinning quantity | 0–5% (by paint weight) |
| Nozzle tip size | 2.0-3.0mm |
| Air pressure | 0.3–0.5 MPa (approx. 3–5 kg/cm²) |
| Roller/brush | Thinner: xylene; thinning ratio 0-3% (by paint weight) |
|---|---|
| Cleaning solvent | Xylene |
| Safety measures | See the Safety Data Sheet (MSDS) of Shanghai Kailin Paint Factory. |
| Packaging | 4L can, 3.5kg; 18.5L can, 17.5kg |
| Shelf Life | 6 months. |
| Notes | To use this product correctly, read the Application Guide in this data sheet carefully. |
The above information and data for this product are accumulated from our tests and practical experience
accumulated, and may serve as an application guide. For application carried out under conditions unknown to us, we
We guarantee only the quality of the paint itself and accept no responsibility for other matters. We
and reserve the right to make modifications as the product is improved.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
